 KAIFS V I PPremium,MVM
join:2001-01-11
CHEEEESE WI | reply to J D McDorce
Re: [Nexland] New Firmware do we have to change jumpers for firmware upgrade via nxtftpw utility?
mine keeps timing out for whatever reason.... |
|
Peterg1Premium
join:2001-12-29
Montreal, QC Reviews:
 ·Videotron
| said by KAIFS:do we have to change jumpers for firmware upgrade via nxtftpw utility? mine keeps timing out for whatever reason.... Here is the proper procedure:
1. Power off the unit (the manual says pull the plug which I assume may be somewhat different than turning off the power switch).
2. Flip DIP switch 1 & 2 to the ON position (DOWN).
3. Put the power plug back into the unit
4. Navigate to where you downloaded nxtftpw and double-click it.
You will get a dialog box and select the firmware to flash and the address of the router (normally 192.168.0.1).
Press PUT and you will see it make several "tries" which is normal.
Once you get a success message return the dip switches to normal (the up position), power down the router and then power it up again.
Peter |
|
