brizz66
@optonline.net
|  [ATT CV] Linksys TA blinking Power LED
Let me start by saying the TA was working fine.
I powered on the TA after it was off about 10 minutes and now I can't get dial-tone. I noticed the Power LED is blinking, occasionally the Internet LED blinks too, and the Phone LED is off. According to the Linksys user guide the blinking Power LED indicates 'the Router is booting up or running a system self-test', the blinking Internet LED indicates 'the Router is sending or receiving data over the Internet port'. I performed a 'Re-activate TA' from the account management page, it reported the TA was OK, 'No Errors Found'. I don't believe this since my safe forwarding POTS is receiving calls for my VOIP number.
One other thing, I can't access the TA admin pages, can't even get an IP via DHCP from the TA.
BTW the TA is behind the router.
Thanks for your help.
-Brian |
|
SuperNet33
Go Ninja,Go Ninja Go..
Premium
join:2002-10-08
Harwood Heights, IL
clubs:    | »[ATT CV] Update on UPGRADE!
read that. |
|
BrianNY
Premium
join:2005-01-17
Manorville, NY | Oh boy, earlier today after 5 minutes of the blinking LEDs I powered OFF/ON the TA. I even changed my configuration by placing the TA in front of the router, same results though.
-Brian (aka brizz66) |
|
