Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » Cisco » [Config] QoS+VoIP on a Cisco - sample config
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
OK to buy OEM dram/flash? »
« Pix 501 Inside Access List?  
AuthorAll Replies


LilYoda
Feline with squirel personality disorder
Premium
join:2004-09-02
Mountains


3 edits
 reply to LilYoda
[Config] QoS+VoIP on a Cisco - base

Here is the basic

Out of the below, you may want to adjust the timezone seetings, and remove the config for the aux port if your router doesn't have one...

service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
service password-encryption
no service tcp-small-servers
no service udp-small-servers
!
! Come on, let your imagination go wild and name your router !
hostname XXXXXXXX
!
logging buffered 16000 debugging
no logging console
!
! the enable password is not used, but must
! be different from the enable secret
enable secret XXXXXXXX
enable password XXXXXXXX
!
! Modify the 2 following lines to match your timezone, or remove if you
! want the router to display GMT time
clock timezone EST -5
clock summer-time EDT recurring 1 Sun Apr 3:00 last Sun Oct 3:00
!
ip subnet-zero
no ip source-route
no cdp run
no ip bootp server
no ip http server
no ip finger
ip classless
!
! You can change the below to your own badass disclaimer/banner
!
banner motd #

NOTICE: This is a private network device. All activities on this system
are monitored and recorded.
Actual or attempted use, access, examination, or configuration
change by an unauthorized person will result in criminal and
civil prosecution to the full extent of the law.

Enter password

#
!
! Doesn't have to be the same PWD on Console,Aux and VTY ports
!
line con 0
password XXXXXXXX
login
transport output none
line aux 0
password XXXXXXXX
login
transport input none
transport output none
line vty 0 4
password XXXXXXXX
login
transport input telnet
transport output none
Forums » Equipment Support » Hardware By Brand » CiscoOK to buy OEM dram/flash? »
« Pix 501 Inside Access List?  


Saturday, 05-Dec 12:07:31 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [163] Comcast Releasing Promised Usage Meter
· [145] Avast Antivirus Has Gone Mad
· [126] Comcast Makes NBC Universal Acquisition Official
· [104] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [101] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [95] The Bandwidth Hog Does Not Exist
· [84] FCC Ponders Moving From PSTN To IP Voice
· [81] Latest Consumer Reports Survey Not Kind To AT&T
· [79] New Bill Aims To Limit ETFs
· [74] Sprint Defuses GPS Privacy Media Bomb
Most people now reading
· False positive in Avast! or is it real? [Security]
· Wife might have to work in.... Iowa for a few months!!! [General Questions]
· Windows 7 boot manager editing questions [Microsoft Help]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Road Runnner up to 50 mbps is ready ! [Road Runner]
· UPS - What do you people think happened? [General Questions]
· Why do you switch distros? [All Things Unix]
· DNS options, what are YOU using? [TekSavvy]
· Honest comparison between cable and FiOS [Verizon FIOS TV]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]