Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » US Telco Support » Verizon » Verizon Online DSL » DSL & Faxing
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Couple questions - email and retentions...? »
« Online Registration PW  
AuthorAll Replies

JohnA
Premium
join:2003-09-16
Pittsburgh, PA

reply to gr8shetland
Re: DSL & Faxing

said by gr8shetland See Profile:

In the directions for the AIO is states not to connect a DSL line to the AIO.
Without going back and checking, there are pictures of how to use the AIO in standalone mode when connected to a DSL line (where to put the filter and such). Try getting it working that way first, not hooked to the computer.

gr8shetland
Premium
join:2005-01-23
New Castle, PA

reply to JohnA
It's taken me a few days to get back to this. Had the flu or something. Andyway....

I have a wall phone jack dedicated the the pc. I don't have a telephone on this line at all. I hooked up a spliter at the wall. Attached a DSL filter to the right "hole" and connected a regular telephone cable to it and the other end to my AIO. The DSL cable line is in the left "hole" of the spliter.

I tried faxing to this line and still no go. Is it a hopeless case? In the directions for the AIO is states not to connect a DSL line to the AIO. Are my hopes for connecting the fax in my AIO to the dedicated pc wall jack shattered? If so, what a waste of the AIO's potential.

Thanks for everyone's input.


JohnA
Premium
join:2003-09-16
Pittsburgh, PA
reply to gr8shetland

The A960 connects to the PC by USB. There are two phone connections on the back. One goes to a phone, the other goes to a phone wall jack. The one that goes to the phone wall jack is the one that has to have a filter.

gr8shetland
Premium
join:2005-01-23
New Castle, PA
reply to nycdave
Thanks for your patience. I installed a filter on the AIO line to the CPU. Tried to send a test fax from the Sharp. Nothing. Now what?


nycdave
Premium,MVM
join:1999-11-16
Melville, NY
·Verizon FIOS

reply to gr8shetland
POTS = Plain Old Telephone Service = basic dial tone. Fax machines and AIO's are still considered POTS devices - therefore, they need DSL filters. You need to install a DSL filter on the cable from the AIO to the CPU (that should be a phone cable). It doesn't matter which end of the phone cable the filter is installed on. If the fax modem in the Dell is hooked up to the same phone line that the DSL is on, you need to install a filter on it - simple as that. Again, it doesn't matter where you hook up the DSL filter, as long as it is hooked up...If you are attempting to receive faxes on either the AIO or the fax modem, they need to be filtered from the DSL signal....
Forums » US Telco Support » Verizon » Verizon Online DSLCouple questions - email and retentions...? »
« Online Registration PW  


Thursday, 10-Dec 13:30:43 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [200] Sprint Sued For Distracted Driving Death
· [131] AT&T Launching New 24 Mbps U-Verse Tier
· [82] 3G Network Test Says AT&T Is Tops
· [76] AT&T Hints At Usage-Based iPhone Data Pricing
· [72] Mediacom Unveils 105 Mbps Pricing
· [68] WPA Cracker: Test WPA-PSK Networks In 20 Minutes
· [66] Sprint Poised For A Turnaround?
· [51] The Future Of Wi-Fi Is Bright
· [47] Site Leaks Yahoo, Verizon Fed Data Share Pricing
· [45] Microwaving Your Innards Is Not 'Extreme'
Most people now reading
· [WIN7] Well, I was dumb, but do I have recourse? [Microsoft Help]
· IMG 1.7 (IMG Updates and Discussion) [Verizon FIOS TV]
· Will Gearscore die now? [World of Warcraft]
· New Mediacom Email [Mediacom]
· Cross Server Dungeon Experience [World of Warcraft]
· malware has been found hidden inside an Ubuntu screensaver [Security]
· Icecrown 5-man strats [World of Warcraft]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]
· ICC10 [World of Warcraft]
· Windows 7 boot manager editing questions [Microsoft Help]