wifi4milez
Big Russ, 1918 to 2008. Rest in Peace
join:2004-08-07
New York, NY | reply to nauticax
Re: [Monitoring] Samurize plugin for Alchemy
I notice that this plugin was meant for Sveasoft. Will it work with stock Linksys firmware or hyperwrt as well? It looks fantastic!
--
I like dogs, guns, and cheeseburgers. Whats your malfunction? |
|
nauticax
join:2001-02-27
Germantown, MD
| reply to GI Suck
said by GI Suck  :Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it! Sorry to bring this back from the dead but how did you monitor total amount of bandwidth usage (data transferred) for your WAN port? |
|
XCOM
digitalnUll
Premium
join:2002-06-10
Houston, TX
clubs: | reply to twosox
You could run DD-WRT and create a dyndns account then enable the sysinfo page and you can see all your router information any where you go..
--
@root I.T. |
|
twosox
join:2002-01-20
Mclean, VA | reply to digiblur
Just wanted to see if I could essentially monitor the line from somewhere, say, like at work, for instance. I probably wouldn't need all of the stats, but maybe the router load and just to know that the connection is still running.
Sox |
|
Nate425
Premium
join:2005-02-03
Charlottesville, VA
clubs:
| reply to digiblur
Ok, I just noticed that under where it says Select function to run: it doesn't have anything that looks like router load. Is that all that's missing?
Other than that, I have SNMP enabled on my router, and it's a v2.0 router, so I would assume it's the same OID as the default? Everything else works fine with the default OID, so I'm assuming that's ok. Thanks for your help. |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to Nate425
said by Nate425 :Forgive me if this is something obvious... I have everything working fine, and it's really cool, except the router load only displays a % with no number there. I can't seem to get that to display the router load. What should I change? I've put in the correct IP address of the router, and the password, and have LoadAlchemyStatus running as well as LoadAlchemyWireless. What am i missing? Thanks! Do you have SNMP enabled on the router? Your router might have a different OID for the router load?
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
Nate425
Premium
join:2005-02-03
Charlottesville, VA
clubs:
| reply to GI Suck
Forgive me if this is something obvious...
I have everything working fine, and it's really cool, except the router load only displays a % with no number there. I can't seem to get that to display the router load. What should I change? I've put in the correct IP address of the router, and the password, and have LoadAlchemyStatus running as well as LoadAlchemyWireless. What am i missing? Thanks! |
|
GI Suck
I Got Mail Yay
join:2004-01-14
Oshawa, ON
| reply to ocman
said by ocman :gi suck, how can I get your monitoring window? Just edit the config file and do a google search for iod's for the wrt54g. |
|
ocman
join:2005-01-15
Columbus, GA | reply to digiblur
gi suck, how can I get your monitoring window? |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to twosox
said by twosox :Is there a way to do this remotely? (i.e outside the private LAN from the WAN side) Would you have to forward the SNMP ports or something like that? Sox Which of the stats would you like to monitor?
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
twosox
join:2002-01-20
Mclean, VA |  reply to digiblur
Is there a way to do this remotely? (i.e outside the private LAN from the WAN side)
Would you have to forward the SNMP ports or something like that?
Sox |
|
GI Suck
I Got Mail Yay
join:2004-01-14
Oshawa, ON
| reply to digiblur
said by digiblur :said by GI Suck :Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it! I had the same thing but when I found out it only goes up to 4gb then flips over I took it off. Damnit! I guess it exceeded the bit limit! Just noticed that now!  oh well, live and learn!
--
[Internet] Rogers Yahoo! Extreme 5mbps/800kbps [Modem] Scientific Atlanta WebSTAR DPX2100 DOCSIS 2.0 [Router] WRT54g DD-WRT #21c [Computer] P4 2.53GHz 1024MB RAM ATi 9700 Pro Sound Blaster Audigy 160GB RAID 0 |
|
Bill
Light Up The Halo
Premium,VIP
join:2001-12-09
clubs:
| reply to digiblur
said by digiblur :said by Bill :said by eugenegill :said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! Go into the .ini file and look for this: quote:
[Source 22]
Type=TActiveDLLCollector
Or you could just open the Samurize config tool and edit the meter the easy way  That'd be too easy :p
--
The new Secure-Wifi.net is open!
|
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to GI Suck
said by GI Suck :Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it! I had the same thing but when I found out it only goes up to 4gb then flips over I took it off.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to Bill
said by Bill :said by eugenegill :said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! Go into the .ini file and look for this: quote:
[Source 22]
Type=TActiveDLLCollector
Or you could just open the Samurize config tool and edit the meter the easy way
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
GI Suck
I Got Mail Yay
join:2004-01-14
Oshawa, ON
| reply to digiblur
Samurize Updated Again |
|
|
Bill
Light Up The Halo
Premium,VIP
join:2001-12-09
clubs:
| reply to eugenegill
said by eugenegill :said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! Go into the .ini file and look for this:
quote:
[Source 22]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyWireless
Param0=Your routers IP goes here
Param1=Your web-config login pw goes here
Param2=60
and
quote:
[Source 33]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyStatus
Param0=Your routers IP goes here
Param1=Your web-config login pw goes here
Param2=200
and
quote:
[Source 34]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyDHCP
Param0=Your routers IP goes here
Param1=Your web-config pw goes here
Param2=120
The other ones will use the SNMP string.
--
The new Secure-Wifi.net is open!
|
|
eugenegill
join:2004-05-05
Greenville, SC
 ·Charter Pipeline
 ·VoicePulse
| reply to Bill
said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! |
|
Skyrunner8
join:2002-01-10
Berkeley, CA | reply to digiblur
Would it be possible to do this by the command line and not by http?
--
-Jeff |
|
ahubbard
join:2001-06-22
Silver Spring, MD | reply to digiblur
i know some of them, but svea forum might be the best place to ask that |
|
