Matt
Take me down to the paradise city
Premium
join:2003-07-20
Jamestown, NC
 ·North State Commun..
| reply to Skyrunner8
Re: [Monitoring] Samurize plugin for Alchemy
said by Skyrunner8  :You might have to turn on remote management, and add the port, but I *think* it should work that way. Remote Management is only used if you want to access your router from the WAN. Not LAN. |
|
Skyrunner8
join:2002-01-10
Berkeley, CA | That response was to a post which now reads DELETE ME.
--
-Jeff |
|
djlimon
Premium
join:2004-02-23
Montebello, CA | reply to digiblur
I must have screwed something up. I am on Alchemy 7a and can't get the Router Load % to run. What are the values associated with meter 15? |
|
mcaslan
join:2000-06-17
Baltimore, MD
| I've got my router @ 192.168.2.1 and my default password changed to let's say 'password'. DO I need to enable the syslogd or is this done through SNMP, and if SNMP where do I load my SNMP details where the Name has been modified...
Thanks looking forward to using this... |
|
Matt
Take me down to the paradise city
Premium
join:2003-07-20
Jamestown, NC
·North State Commun..
| said by mcaslan :I've got my router @ 192.168.2.1 and my default password changed to let's say 'password'. DO I need to enable the syslogd or is this done through SNMP, and if SNMP where do I load my SNMP details where the Name has been modified... Thanks looking forward to using this... No, you don't need to enable Syslogd. |
|
Skyrunner8
join:2002-01-10
Berkeley, CA
2 edits | reply to digiblur
After futzing around with it for a while, I finally got this, as it fits with the rest of my theme. A little cramped, but it gets the job done 
Tell me what you think.
--
-Jeff |
|
Bill
Light Up The Halo
Premium,VIP
join:2001-12-09
clubs:
| Looks good
you got lots of people using that AP, don't you 
--
The new Secure-Wifi.net is open!
|
|
Skyrunner8
join:2002-01-10
Berkeley, CA
| I have 16 people in my house (I go to college). Its amazing that there is that little right now. I just set it up to be red if the WAN Rx is over 325 KB/s and WAN TX is over 50, to be helpful. The Graph is now working well, and I am loving it. Anybody else mess with it and get their own setup?
--
-Jeff |
|
GI Suck
I Got Mail Yay
join:2004-01-14
Oshawa, ON
| reply to digiblur
My refined layout! |
What do you think? |
|
pipdipchip
8 Megabits A Second
Premium
join:2003-12-04
Hanover, MN | reply to digiblur
If anyone comes out with another cool layout or MOD. I'd love to host it.
--
CCNA Training in Progress - Webmaster of WRT54G.com |
|
Skyrunner8
join:2002-01-10
Berkeley, CA | reply to nightemaster
weird... same with mine. at first it was fine, but after a couple of router reboots, its at 111%. I set up an alarm to turn it red if it is over 80....now its all in the red.
--
-Jeff |
|
nightemaster
join:2004-09-04
Brooklyn, NY | reply to digiblur
ok i figured out how to fix the above 100% thingie, you just change the conversion factor to something like 50 on mines. |
|
Bill
Light Up The Halo
Premium,VIP
join:2001-12-09
clubs:
| reply to digiblur
Hrmm.. I'm having the problem where it kills the routers web-interface.
I've changed the update interval, as suggested, but it still won't work.
Do I need to restart the router?
--
The new Secure-Wifi.net is open!
|
|
imrf
Premium
join:2002-06-06
Utica, MI | Mine does the same thing. Yes, to get all the data back the router needs to be rebooted/restarted. The last version did this to me too. |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to digiblur
I've been monitoring my WRT54G via SNMP for about 3-4 months now and I've never experienced the 100% thing.
To revive the httpd use telnet to do the following:
killall httpd
/usr/sbin/httpd -d /www
I told Sveasoft about it and hopefully one of the dev team members can recreate the error. I found out it is the LoadAlchemyStatus meter that causes this.
Does anyone see a need for another Linksys model monitoring?
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
Skyrunner8
join:2002-01-10
Berkeley, CA
| I am having somewhat of a different problem. Ever since I started, my router will go into what I call hiding mode. It wont' give out any other DHCP addresses, the wireless in the status page says Channel 0, and all the DHCP info that it picked up for the WAN is gone. I tried disabling SNMP but it still seems to do it. Any ideas anybody?
--
-Jeff |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| said by Skyrunner8 :I am having somewhat of a different problem. Ever since I started, my router will go into what I call hiding mode. It wont' give out any other DHCP addresses, the wireless in the status page says Channel 0, and all the DHCP info that it picked up for the WAN is gone. I tried disabling SNMP but it still seems to do it. Any ideas anybody? Like this
»members.cox.net/wrt54g/dead1.jpg
»members.cox.net/wrt54g/dead2.jpg
»members.cox.net/wrt54g/dead3.jpg
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
imrf
Premium
join:2002-06-06
Utica, MI | That's exactly what mine does after 12 hours or so. It did it with the previous plugin too. A power cycle fixes the problem for me, but it's a tad annoying. |
|
SniperKilla
join:2002-04-22
Pittsburgh, PA | reply to digiblur
how are you guys getting the names to show up under wireless connections? the only thing i can get to show up is the MAC address |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| said by digiblur :7. Do not be alarmed when the MACID is shown as the wireless client ID. This is due to the way I coded the DHCP matching engine to keep the number of HTTP pulls down. Once the plugin finds a MAC ID displayed, a flag is set to pull the DHCP table during the next update. At the next update the MAC ID will change to the host name provided in the DHCP table. The DHCP table is only pulled when needed this way. If LoadAlchemyDHCP is used, the MAC ID's will only be converted to the hostname when the LoadAlchemyDHCP meter is pulled.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
