SniperKilla
join:2002-04-22
Pittsburgh, PA | reply to digiblur
Re: [Monitoring] Samurize plugin for Alchemy
ah.. i dont use DHCP on my clients so i guess im screwed on that one  |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| said by SniperKilla  :ah.. i dont use DHCP on my clients so i guess im screwed on that one You use statics? Why not use DHCP statics? |
|
SniperKilla
join:2002-04-22
Pittsburgh, PA
4 edits | reply to digiblur
-Nevermind-
got DHCPD setup properly now it says that the lease never expires.. im used to the 4 netgears i owned before this.. this is my first linksys.. the netgears called it address reservation or something like that
 |
|
djrobsd
join:2002-01-24
San Diego, CA
| Hi,
I'm having difficulty getting all the stuff to show up on my setup. I'm running Alchemy-pre7a v3.37.6.8sv and it shows the uptime, WAN IP, gateway, WLAN rate, and WLAN channel, as well as all the wireless clients, but I can't get the traffic to show, it just says "Error kb/s" and "error%" on router load..
Any ideas how I can fix this? |
|
Skyrunner8
join:2002-01-10
Berkeley, CA
2 edits | reply to digiblur
Exactly....I went with a couple of days w/out using this plugin for samurzie and the router didn't die. Weird.....
This isn't just the web interface that is dieing, its not giving out new DHCP addresses, etc.....
Also: Why not make it so when you click on certain statistics, it takes you to the webpage in the router interface? I just added it to my custom version. I think these people would love it! 
--
-Jeff |
|
Skyrunner8
join:2002-01-10
Berkeley, CA | reply to djrobsd
Go into the Administration tab and enabled SNMP. That should fix it
--
-Jeff |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to Skyrunner8
said by Skyrunner8 :Exactly....I went with a couple of days w/out using this plugin for samurzie and the router didn't die. Weird..... This isn't just the web interface that is dieing, its not giving out new DHCP addresses, etc..... Also: Why not make it so when you click on certain statistics, it takes you to the webpage in the router interface? I just added it to my custom version. I think these people would love it! If I ever release another version I might add this in to the sample file.
Actually the whole project got canned twice and was recoded three times or so in an attempt to overcome the HTTPD problem. A few users at Sveasoft wanted it so I went ahead and finished it in hopes someone would figure out the problem with HTTPD dying.
On the other hand, in my Sipura plugin I can hit the Sipura device with an HTTP request every second even while it's holding two phone calls without any performance problems.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
Skyrunner8
join:2002-01-10
Berkeley, CA
1 edit | It seems though that if i just don't do the DCHP call, it doesn't crash the HTTPD. Anybody else want to confirm this?
edit: Nm, just the other did crash it. I am trying just wireless call right now... |
|
Skyrunner8
join:2002-01-10
Berkeley, CA | reply to digiblur
Is there any way to get these statistics from a command line?
--
-Jeff |
|
ahubbard
join:2001-06-22
Silver Spring, MD | reply to digiblur
i know some of them, but svea forum might be the best place to ask that |
|
Skyrunner8
join:2002-01-10
Berkeley, CA | reply to digiblur
Would it be possible to do this by the command line and not by http?
--
-Jeff |
|
eugenegill
join:2004-05-05
Greenville, SC
 ·Charter Pipeline
 ·VoicePulse
|  reply to Bill
said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! |
|
Bill
Light Up The Halo
Premium,VIP
join:2001-12-09
clubs:
| said by eugenegill :said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! Go into the .ini file and look for this:
quote:
[Source 22]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyWireless
Param0=Your routers IP goes here
Param1=Your web-config login pw goes here
Param2=60
and
quote:
[Source 33]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyStatus
Param0=Your routers IP goes here
Param1=Your web-config login pw goes here
Param2=200
and
quote:
[Source 34]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyDHCP
Param0=Your routers IP goes here
Param1=Your web-config pw goes here
Param2=120
The other ones will use the SNMP string.
--
The new Secure-Wifi.net is open!
|
|
GI Suck
I Got Mail Yay
join:2004-01-14
Oshawa, ON
| reply to digiblur
Samurize Updated Again |
|
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to Bill
said by Bill :said by eugenegill :said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! Go into the .ini file and look for this: quote:
[Source 22]
Type=TActiveDLLCollector
Or you could just open the Samurize config tool and edit the meter the easy way
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to GI Suck
said by GI Suck :Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it! I had the same thing but when I found out it only goes up to 4gb then flips over I took it off.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
Bill
Light Up The Halo
Premium,VIP
join:2001-12-09
clubs:
| reply to digiblur
said by digiblur :said by Bill :said by eugenegill :said by Bill :You were right, I hadn't modified the password that the "Load" meters were using to get their data. Please explain how to change the password. Darned it I can find it! Go into the .ini file and look for this: quote:
[Source 22]
Type=TActiveDLLCollector
Or you could just open the Samurize config tool and edit the meter the easy way That'd be too easy :p
--
The new Secure-Wifi.net is open!
|
|
GI Suck
I Got Mail Yay
join:2004-01-14
Oshawa, ON
| reply to digiblur
said by digiblur :said by GI Suck :Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it! I had the same thing but when I found out it only goes up to 4gb then flips over I took it off. Damnit! I guess it exceeded the bit limit! Just noticed that now!  oh well, live and learn!
--
[Internet] Rogers Yahoo! Extreme 5mbps/800kbps [Modem] Scientific Atlanta WebSTAR DPX2100 DOCSIS 2.0 [Router] WRT54g DD-WRT #21c [Computer] P4 2.53GHz 1024MB RAM ATi 9700 Pro Sound Blaster Audigy 160GB RAID 0 |
|
twosox
join:2002-01-20
Mclean, VA | reply to digiblur
Is there a way to do this remotely? (i.e outside the private LAN from the WAN side)
Would you have to forward the SNMP ports or something like that?
Sox |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| said by twosox :Is there a way to do this remotely? (i.e outside the private LAN from the WAN side) Would you have to forward the SNMP ports or something like that? Sox Which of the stats would you like to monitor?
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device. |
|
