VOIP etc > Voice Over IP - VOIP > VOIP Tech Chat > [DTA310] Unlocked with AR16O firmware.

[DTA310] Unlocked with AR16O firmware.

Re: [Packet8] BPA-410 ...or is it BVA8052 ?!?

DTA

Please keep us posted! Maybe Caller ID will be active.

reply to jds17j
Coolness! Let us know if you can make it work with other service providers, and pass along any tips/tricks.

reply to jds17j
Kewl!! I'd love to mess around with it but I don't have any extra dta's. I don't want to mess up my P8 service...

Keep us posted on anything you find such as CODECs, etc. I also want to know if you can upgrade back to the P8 firmware after you do all this and if anything will remain the same.:)

Well, it is time for DTA-310 price to go up

reply to Sly

SIP Settings

Call Info

Someone try with FWD please.

reply to rcilink
I'm afraid I've just killed a 'good' DTA-310 loading the AR-16 file ;-( So be warned!

reply to rcilink
Hold on... I've finally got it to reboot, but it's in a wierd state. I'll change the items I can and follow-up.

What I want to know if can you reload a Packet8 firmware after this is done and will it mess with Packet8 service?

I would like to try this firmware and set the DTA to run at the uncompressed CODEC (can't remember the name). Then I want to load the DTA firmware and still have it work. Or better yet, I would like to use this new firmware WITH Packet8 service and skip their firmware altogether.

reply to pcmeet
Got it to work with FWD!!! works with echo test, 1800 numbers, and FWD numbers... Incoming caller ID and audio are working... here are the settings:

Server Address: fwdnat.pulver.com
Port: 5082
Domain Name: fwd.pulver.com
I used this dialplan to test: xxx|xxxxx|*1xxxxxxxxxx|x.T|x.#

Codecs, G711U, G711a, G723

wouldn't work right with just fwd.pulver.com in both settings?!?!?

reply to rcilink
One thing i have noticed with the new firmware is that the lights on the front don't seem to work the same... the power light now blinks and the rest of the lights are off, until you pick up the phone and get a solid green on the "phone" light like before.... it almost looks dead, but works great!

reply to rcilink
I got the firmware installed, but it does not seem to work with Asterisk.
--
»www.joako.com

reply to jds17j
Here are the Broadvoice settings for the new firmware:

SIP
Server Address: i just used: proxy.broadvoice.com
Port: 5060
Domain: sip.broadvoice.com
Send Registration Request: checked
Line1:
Phone Number: My BV #
CallerID Name: My Name
SIP Port: 5060
AEC: ON
User Name: My BV #
Password: My BV password
Didn't touch the Port Settings
Dial Plan: 1xxxxxxxxxx|x.T|x.#

OOB Signalling
Send out of band Telephone Events: SIP INFO
Checked the 2 boxes
ABCD event signalling: Transtition

PSTN
i disabled the PSTN port because the DTA doesn't have a PSTN port...

CODECS
g711u, g711a, g729, Silence Suppression Off
Jitter Buffer: Adaptive, 10ms

SYSTEM
I disabled the Automatic Configuration and Automatic Firmware Download just for the hell of it...

reply to rcilink
Seems to be working ok now with Stanaphone... no loss of either side of conversation on in or out calls. I've only set it with the 711u&a and didn't change too many other items purely out of fear!

My link light flickers rapidly constantly. The phone light is on when on line. The Power light seems to be a data indicator and flickers with use and briefly at seemingly random intervals.

reply to rcilink
It's quite possible the units were built in a join venture with 8x8. As IIRC, 8x8 is a fabless company, they just do design/developement.

reply to Sly
Now let us go for the real test someone with Packet8 account should try to upgrade using this file, this may result in unlocking the SIP page for the Packet8 account

I can tell you that the sip13.12 firmware unlocked is useless

Packet8 hard-coded several key settings (sip server and domain) so when u change them, they change back !

I did not post it for that reason-- its no good for non-packet8 uses.

reply to joako
I have the AR16 firmware working with asterisk

I cheated! I had the DTA310 configured using 12.35 and upgraded to this AR16 and it worked!
I will make note of the settings if it will help for config reference..