ALEKSPAUL
join:2005-04-05
Madison, WI | reply to jds17j
Re: [Packet8] BPA-410 ...or is it BVA8052 ?!?
We followed the directions according to jds17j to setup a dta for broadvoice and couldn't get it to work. We just got the message light.
Tried it on two dta´s with the same result. Whats the problem? |
|
illek
Premium
join:2005-03-23
Tulsa, OK | reply to frankzhu
I don't think Broadvoice peers with FWD, hence no way to call FWD from BV. |
|
frankzhu
join:2005-03-12
Saint Louis, MO | reply to Sly
Sly: I meant to say from Fwd hard phone. I searched and found that Fwd can call **282+BV number to read BV. But I still need to find a dial plan to do that.
Still pending questions: how to call fwd from BV? |
|
Sly
Premium
join:2004-02-20
Johnson City, TN
clubs: | reply to frankzhu
By real phone do you mean the Broadvoice hard phone or a FWD hard phone? |
|
frankzhu
join:2005-03-12
Saint Louis, MO | reply to frankzhu
Now we have both fwd and broadvoice working, is there any way to call between the two services?
From the fwd softphone, I can call BV by bv#@sip.broadvoice.com. How can I call from the real phone? |
|
frankzhu
join:2005-03-12
Saint Louis, MO | reply to jds17j
Working fwd dial plan:
"*1xxxxxxxxxx|x.T|x.#"
tested:
fwd 6 digit number - direct call
fwd 3 digit number - direct call
1800 number - dial * first |
|
digiblur
Got Sipura?
Premium
join:2002-06-03
Louisiana
| reply to jds17j
said by jds17j  :Well, it works right away with Broadvoice now... i changed the dialplan to "1xxxxxxxxxx|x.T|x.#" because it wasn't dialing out with the default dialplan... Inbound with caller id works too. Edit: i also renamed the .rom firmware file to a .bin file just in case... this shouldn't make a difference though. Wow, caller info on the web interface of the DTA!  I smell a GetDTA Samurize plugin around the corner! LOL
--
FWD#64466 - »[Sipura] Make your Sipura Speak! - Step by Step |
|
Sasa
join:2001-09-22
| reply to jds17j
Here are FWD settings direct from Leadtek FAQ :
-------------------------------------------------------------------------
How do I configure the system to work with FWD?
-------------------------------------------------------------------------
SIP Server Address: fwd.pulver.com
SIPServer Port: 5060
Domain Name: fwd.pulver.com
Phone Number: The fwd phone number
SIPPort: 5060
User Name: The fwd phone number (not your fwd account name)
Password: The fwd password
Call ID: optional
We suggested that you use fwd STUN server. Go to NAT Traversal tab where:
STUN Server: stun.fwdnet.net
------------------------------------------------------------------------- |
|
jds17j
Premium
join:2004-03-11
Beverly, MA
| reply to pcmeet
Got it to work with FWD!!! works with echo test, 1800 numbers, and FWD numbers... Incoming caller ID and audio are working... here are the settings:
Server Address: fwdnat.pulver.com
Port: 5082
Domain Name: fwd.pulver.com
I used this dialplan to test: xxx|xxxxx|*1xxxxxxxxxx|x.T|x.#
Codecs, G711U, G711a, G723
wouldn't work right with just fwd.pulver.com in both settings?!?!? |
|
pcmeet
Official Dta Guru
join:2003-09-15
Montgomery, AL | reply to jds17j
Someone try with FWD please. |
|
jds17j
Premium
join:2004-03-11
Beverly, MA
1 edit | reply to Sly
SIP Settings | 
Call Info |
Edit: i also renamed the .rom firmware file to a .bin file just in case... this shouldn't make a difference though. |
|
