Sly
Premium
join:2004-02-20
Johnson City, TN
clubs:
 ·Packet8
·Callcentric
 ·Comcast Formerly ..
| reply to gbh2o
Re: [Packet8] BPA-410 ...or is it BVA8052 ?!?
What I want to know if can you reload a Packet8 firmware after this is done and will it mess with Packet8 service?
I would like to try this firmware and set the DTA to run at the uncompressed CODEC (can't remember the name). Then I want to load the DTA firmware and still have it work. Or better yet, I would like to use this new firmware WITH Packet8 service and skip their firmware altogether. |
|
pcmeet
Official Dta Guru
join:2003-09-15
Montgomery, AL | Now let us go for the real test someone with Packet8 account should try to upgrade using this file, this may result in unlocking the SIP page for the Packet8 account  |
|
rcilink
Premium
join:2003-12-15
Manchester, NH
| I can tell you that the sip13.12 firmware unlocked is useless 
Packet8 hard-coded several key settings (sip server and domain) so when u change them, they change back !
I did not post it for that reason-- its no good for non-packet8 uses. |
|
Nate425
Premium
join:2005-02-03
Charlottesville, VA
clubs: | reply to pcmeet
I would love to test this on my packet 8 account and see if it will unlock anything...however, I don't want to make a brick if I can help it. Anyone about to cancel P8 and feel like testing? |
|
rcilink
Premium
join:2003-12-15
Manchester, NH
| There are some known differences with Sip13.12 (the Packet8 firmware) and this firmware... I do not reccomend you try to load the Leadtek (AR16) firmware on a DTA310 intended for use with Packet8 service..
For example: Packet8 uses a custom "stun" type NAT traversal (conveniently, they labeled it "PACKET8" )..
It is just not worth it. But, hey, you can do it if you want..
I would imagine that you will be breaking the TOS by doing it.. be careful, they may attempt to collect on your return of the DTA if it is loaded with a custom firmware... |
|
pcmeet
Official Dta Guru
join:2003-09-15
Montgomery, AL
| reply to Nate425
said by Nate425  :I would love to test this on my packet 8 account and see if it will unlock anything...however, I don't want to make a brick if I can help it. Anyone about to cancel P8 and feel like testing? Even if we unlock anything the password will be ***** I don't think there is a need to do so as Packet8 will start get their failure results, the failure to have satisfied customers who wanted to have a softphone or use their own devices, how they feel now when a customer cancel Packet8 service and use the DTA-310 to join another service like INX or Broadvoice ? both services allow unlimited at $20, softphone and BYOD, may be it is the time for Packet8 to think for real how to satisfy their customers needs
|
|
PJIV
Premium
join:2004-07-13
Niagara Falls, NY | reply to rcilink
might be good for me to get my unit to flash back to packet 8. |
|
Sly
Premium
join:2004-02-20
Johnson City, TN
clubs:
·Packet8
·Callcentric
·Comcast Formerly ..
| Did you try what was stated in this other thread?
»[General] Problem upgrading DTA-310
Let's try to keep this problem on just one thread instead of two. The other thread seems a lot more fitting for your type of problem.
I hope we can get you back to P8 firmware because I want to flash mine with the AR firmware also but not until I'm sure that it can be flashed back. |
|
