Re: Modem GUI w/ Router - ISO Definitive Answer

Forums » US Telco Support » AT&T » AT&T Midwest » Modem GUI w/ Router - ISO Definitive Answer


Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·Status Page ·FAQ ·SBC Techs ·Anti-virus and spyware

Modem setup with Sonicwall TZ170 »
« 5100b setup

BadtzMaru

join:2001-12-06
Cleveland, OH

Re: Modem GUI w/ Router - ISO Definitive Answer

As far as being able to get into the modem's GUI from behind a router, Setup A does not work, and neither does Setup C when I use 255.255.255.0 as the subnet mask for the LAN. Sounds like you've been able to do this successfully. If you have a moment, please post your network config, including how you have your modem setup, and I'll try and duplicate it here. I'm starting to think that I have a bad modem.

permalink · 2005-04-07 20:49:39 ·

gdm
Premium,MVM
join:2001-06-15
Mchenry, IL
clubs:

·AT&T U-Verse

·AT&T CallVantage

·Comcast Digital Vo..

·Comcast

Re: Modem GUI w/ Router - ISO Definitive Answer

This is how 5100b and router should be setup so you can access both.

5100b is doing pppoe off course.

Your router should have a LAN IP of 192.168.1.1 and subnet of 255.255.255.0 and set to DHCP mode.

Then once that is done hit apply/save on the router and reboot your machines if they are being DHCP'd from the router.

I had this setup for 18 months and it worked flawlessly.

permalink · 2005-04-07 20:52:36 ·

your comment..

Forums » US Telco Support » AT&T » AT&T Midwest	Modem setup with Sonicwall TZ170 » « 5100b setup


Saturday, 28-Nov 01:43:33	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF