Avenger20
Premium
join:2004-07-27
Belgium
1 edit | reply to nrf
Re: [Firmware] HyperWRT | Linksys | others?
said by nrf  :docs on this firmware are sparse, what does it mean to use both tkip and aes? that is uses higher strenght encrytion AND changes the key regularly? or is it either/or since some pcs may not support aes? No, it just means that you can use both simultaniously. For example, you have one pc using PSK-AES, and onother one, that only can handle PSK-TKIP.
PSK-AES and PSK-TKIP are both safe, but PSK-AES uses AES encryption (stronger encryption), while PSK-TKIP uses RC4 encryption.
--
»www.hyperspacehome.com
Home of HyperWRT & HyperWAP, custom firmware for the Linksys WRT54G, WRT54GS and WAP54G. |
|
d00zah
join:2003-11-05 | reply to nrf
I interpret it to mean that it'll do either/or when that selection is made. So far, that's the way it seems to work. |
|
nrf
join:2003-02-20
Morrow, OH |  reply to Dustyn
docs on this firmware are sparse, what does it mean to use both tkip and aes? that is uses higher strenght encrytion AND changes the key regularly? or is it either/or since some pcs may not support aes? |
|
d00zah
join:2003-11-05 | reply to Cyberian75
Yes. And WPA-PSK TKIP. And WPA-PSK TKIP+AES. |
|
Cyberian75
join:2004-03-16
Beaverton, OR | reply to imrf
Does DD-WRT support WPA-PSK AES??? |
|
TuscanRaider
join:1999-08-14
Fountain, CO
clubs:
| reply to Dustyn
quote:
If this is correct... would you choose HyperWRT over the official Linksys/Ciscoe firmware? And why?
1) Can be safely loaded over the stock Linksys firmware (even using the same Linksys TFTP program).
2) Can adjust transmit power.
3) Can telnet into the router to do stuff via a Linux command shell.
4) Can run Kai Xlink with it.  |
|
MiNdErAsR
Minderasr
join:2000-11-25
| reply to Dustyn
said by Dustyn :can you re-install the official Linksys firmware for the WRT54Gv2? Yes. |
|
imrf
Premium
join:2002-06-06
Utica, MI
 ·WOW Internet and C..
| reply to Dustyn
said by Dustyn :If this is correct... would you choose HyperWRT over the official Linksys/Ciscoe firmware? And why? There really isn't a "best" per 'se. But Avenger20 's HyperWRT sticks close to the Linksys firmware with only minor tweaks, the power hack being the big thing. The power hack will allow you to crank up the power of the radio to allow you to get signal in those hard to reach areas. DD-WRT is another good choice if you would like all the little extras that the Sveasoft firmware has, but without the hassle of paying Sveasoft for it.;)
I use both HyperWRT and DD-WRT and both work flawlessly on my WRT54g. |
|
Dustyn
Premium
join:2003-02-26
Ontario, CAN
1 edit |  I don't know a lot about the open source firmwares out there. From what I've heard.. HyperWRT Firmware by...Avenger??.... seems to be the best choice? 
If this is correct... would you choose HyperWRT over the official Linksys/Ciscoe firmware? And why?
Also... if you install HyperWRT firmware and you notice no improvements or simply just don't like it, can you re-install the official Linksys firmware for the WRT54Gv2?
Thanks... 
WRT54G v2: Firmware Version: v3.03.6
--
"You have no idea what I am capable of. People who have tried to cross me, have lived to regret it... ~Michelle Stafford (Phyllis) |
|
