Laxxx
join:2005-05-11
| Speedstream 4100 Admin password
Greatings to the Broadband Crew,
my problem ist this: I now have ADSL and the provider sent me the new "SPEEDSTREAM 4100 ADSL MODEM" and ist pretty good, unfortunately the admin password, which should be "Admin" as default doesnt work. if I want to log in as User,it´s no problem...
but when only logged as user, I can´t do anything on router (only put back to bridge mode) but no port forwarding or anything else...
I tried to find something in the net, but no luck for me....
maybe someone knows the default password for it, or a Master password.....
I hope it´s enough information.
seeya, Laxxx |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
2 edits | You would have to tell us as you are the first poster with a 4100.
The is only one (1) article listed at the KB.
SpeedStream 4100 Quick Start Guide
»kb.efficient.com/article.asp?art···75&p=351
Even the 4200 users have this problem and no answer.
»speedstream 4200
Regards,
Doctor Olds |
|
Laxxx
join:2005-05-11
| It sais Default password should be admin, too...
do you think I should try to do a firmware update? when I do so, does the modem switch all the configuration to default again?
sorry but I´m new to DSL, and never expected such a Pproblem... or any other ideas? |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| The instructions you are reading are for the Router version. There are three (3) types of 4100 and I bet your ISP does not give you the Router version which is the most expensive version.
What Firmware? I've not seen any for the 4100/4200 listed by Efficient.
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
Laxxx
join:2005-05-11 | dammit....obviously I didn´t really understand it, but now I got it, I found an Icon located to my router....
but big thanks for the hint....
hope I wont have such a noob problem again
Laxxx |
|
Gizmho
@citykom.de | so...what was your solution to this problem. I have the same admin/password thing here. this router really sucks.
What do you mean by "I found an Icon..."?
Thanks,
Ben |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| said by Gizmho:
I have the same admin/password thing here. this router really sucks. You mean your ISP really sucks for giving you the crippled version and not letting you be the Admin. Right? Since you haven't been able to get into the unit it's unfair to say it sucks just because you are locked out.
Anyway, there is no Username. Read the image I posted.
Do you have UPnP enabled in XP? That's most likely the "Residential Gateway" desktop icon he found.
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
Gizmho
@citykom.de
| Ya, ok, my ISP sucks. I enabled the UPnP, plugged in the this crippled SpeedStream, restarted but no Icon appeared.
And by using the browser to configure the modem I have no choice to leave the username blank. There is a drop-down button that only accepts "user" or "admin" as username.
Is it possible to force Window to detect an UPnP device?
Greetz
Ben |
|
Gizmho
@citykom.de | Remark: By the way I am wondering how Windows can detect a DSL Model via the LAN cable? |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
2 edits | said by Gizmho:
Remark: By the way I am wondering how Windows can detect a DSL Model via the LAN cable?
It can't detect a Bridge/Modem, but if you have a Router/Modem with UPnP enabled then it detects it by using UPnP. It works over the Ethernet cable just like any protocol can with Gateway Devices (i.e., Routers).
You must have "Universal Plug and Play Device Host" and the "SSDP Discovery Service" running on XP for it to work and the Device connected to it must have it's UPnP fully enabled. If any one service is disabled it will not work.
»www.microsoft.com/technet/prodte···pxp.mspx
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to Gizmho
said by Gizmho:
Is it possible to force Window to detect an UPnP device? No, it doesn't work that way.
Understanding UPnP™: A White Paper
»www.upnp.org/resources/whitepapers.asp
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
Gizmho
@citykom.de
| Ok, this UPnP thing works now. I forgot to install the UPnP user interface from the Windows components setup.
In the network settings it is called "SpeedStream Router". Nevertheless it helps not much of course I still can't logon.
I read about the possibility to logon via telnet. But telnet doesn't accept any of the usernames (admin, user).
So how can I find out if this thing here is a router or just a modem?
Thx,
Ben |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs: | If it has UPnP and placed an Icon on your PC then it is a Router.
If you cannot access it then you should complain to your ISP.
Regards,
Doctor Olds |
|
Laxxx
join:2005-05-11
| reply to Gizmho
hi there again, the thing was I could not connect to my router/modem the way it is said in the instruction, i have tried several times.
and now, sorry I write german, but so I can explain to Gizmho:
@Gizmho
ich bin auf Systemsteuerung/Netzwerkverbindungen gegangen, da hat sich ein Icon erstellt welches "Internetgateway" heisst.
wenn du auf das Icon klickst und deine Verbindung darüber herstellen willst, musst du erst über deinen Browser die verbindung zu deinem Modem/Router unterbrechen und dann über das internetgateway verbinden (doppelklick sollte genügen)
wenn du das geschafft hast, müsste in Taskleiste ein "connected" symbol auftauchen und diese sprechblase, dass du 1,8 oder 2.4 mbit verbunden hast oder so...
wenn du dann auf das symbol klickst öffnet sich das "Status" fenster und du klickst auf "Eigenschaften", dann auf "Einstellungen" und da kannst du dann den Port und die IP einstellen, ob UDP oder TCP usw. dann sollte es klappen.
Ich komm aber auch nicht in den Router/Modem so wie das in der anleitung erklärt ist. ich gehe davon aus das du bei Citykom bist (laut dem Namen), ich auch...
I just explained the way I could do the Port forwarding with my Router/Modem. and he has the same local Provider I have...
Laxxx |
|
Laxxx
join:2005-05-11
| that is a screenshot of the menu where u should type in the password. like Gizmho allready explained there is no possibility of blanking the username, its Admin or User, and if u select user and type USER for password, you can connect, but only have a small amount of thing you can do...
and select Admin as username and type Admin as password (like its said in the instruction) doesn´t seem to work. |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| If you purchased a Router from your ISP then call and complain about being locked out of the Router you purchased. If the ISP rents or gives you the Modem then they appear to have locked the "end user" (aka the customer) out of the unit and there is no known way to get around it when crippled and you do not have ADMIN rights.
Hope this helps.
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
Laxxx
join:2005-05-11
| I just turned the thing around and looked the little sticker on the back, there it sais:
SIEMENS
SpeedStream 4100
Ethernet ADSL MODEM
so I guess it is a MODEM...and we don´t have to discuss that any further.
For me your help was more than helpfull, thanxxx for that so far.
Laxxx |
|
buggage
Premium
join:2002-11-28
1 edit | Laxxx, check your IM please.
Also, don't put much value into what the sticker states. It's already more than just a modem by the fact that you can log into the user interface, and that you even have directions on how to log onto the device. Though the firmware has probably a.) not been tested properly b.) been purposely crippled (either in the .img file or .def file) in some way to not give out the admin access. |
|
Laxxx
join:2005-05-11
1 edit | reply to Gizmho
Gizmho, I now have the password for logging in as admin. Thanks for the help buggage.
if you are interested in trying it, please contact me or write something here.
Laxxx |
|
Niko9583
@citykom.de
| hi
i´m a owner of the speedstream 4100 modem/router too and i would need the admin password as well.
would be nice if you could give it to me 
Thanks in advance
Niko (ceilidh@gmx.de) |
|
