Tsume
join:2004-02-23
Johnson City, TN | 2.53 on DLINK CANADA?
»support.dlink.ca/ProductView.asp?ProdID=219
2.53 [b69!]
Woooo! Time to test. |
|
michaelzhao
join:2004-04-17
Toronto, ON | I will upgrade.  :D:D |
|
Tsume
join:2004-02-23
Johnson City, TN
 ·ViaTalk
 ·Comcast
·Cox HSI
| I don't know if this was in b66, but the wireless page now has only the options for security "WEP, WPA, WPA2"- and you can't choose AES or TKIP now. You have to pick WPA if you want TKIP, and WPA2 if you want AES.
Also, the really big fields for setting the WMM QoS crap are still gone.
Something weird... when I did crash recovery, it didn't erase my settings like it usually does... |
|
aarono8
join:2003-01-10
Ottawa, ON | reply to Tsume
this firmware A-OK here on my di-624 rev c1.
note: I DID do crash recovery. |
|
tquade
join:2000-10-14
Regina, SK | Installed and happy on a rev c.
Also installed the XP WPA2 hotfix along with the Atheros 4.0.0.167 driver only (no client or supplicant).
So far so good. |
|
dynamx
join:2004-12-05
XXXXXX | reply to Tsume
doesn't save old settings but I use it only as an ap/switch. seems to be working okay so far but what is the wmm qos function in the wireless section? |
|
xpwe
@migros.ch | reply to Tsume
Has anybody a release description? |
|
bobbao
@61.49.x.x | reply to Tsume
Someone can give a copy to me? I can not download from it! |
|
Tsume
join:2004-02-23
Johnson City, TN | reply to Tsume
If there were release notes for it, I'd have posted them 
Here ya go since you can't download it from the site for some reason. |
|
Tsume
join:2004-02-23
Johnson City, TN
·ViaTalk
·Comcast
·Cox HSI
| reply to Tsume
-File- |
|
Talon88
The One
join:2003-08-13
Toronto
 ·Bell Sympatico
4 edits | reply to Tsume
:::
Woo, D-Link Canada Released faster than US....!!
Unbelievable! 
F/W = 2.53, Build:0069
Date = Wed, 20 Apr 2005
CPU BSP: ar531x_wmm, 4.0.0.58, Oct, 27, 2004, build 0001
DRIVER: 1.0.0.0010, Mar, 10, 2005, build 0010
STACK: 1.0.0.1343, Apr, 07, 2005, Build 1344
AR5 F/W = ar531x_wmm, 4.0.0.167, 11:00, 11 Apr, 2005, Build 1025
AR5 Domain = 0x10, FCC1_FCCA
AR5 SSID = ?????
Watch Dog = 1
Restore Default = 0
Checksum = 0x0624b9f3
::: |
|
Talon88
The One
join:2003-08-13
Toronto
·Bell Sympatico
1 edit | reply to Tsume
:::
Tsume, I can do "crash recovery" with my steps &
All settings are Gone....! Maybe you accidently
got short release when holding the reset button...
:::
--
[=Talon88=]
»DI-624 Firmware update w/ Crash Recovery Step by S --
»[Info] Some Clue about DI-624 Reboot |
|
cpipojoe
join:2005-01-16 | reply to Tsume
Also, Why there are v2.53B69 & v2.53B69........???????? Sorry Talon88, I do not get it. You mention two times the same firmware number. Can you clarify your point.
Thanks. |
|
Talon88
The One
join:2003-08-13
Toronto
·Bell Sympatico
2 edits | :::
Sorry, typing error. Corrected. Thanks....!
:::
said by cpipojoe  :Also, Why there are v2.53B69 & v2.53B69........???????? Sorry Talon88, I do not get it. You mention two times the same firmware number. Can you clarify your point. Thanks. --
[=Talon88=]
»DI-624 Firmware update w/ Crash Recovery Step by S --
»[Info] Some Clue about DI-624 Reboot |
|
Bwuutje
join:2005-01-10
| reply to Tsume
»tsd.dlink.com.tw/ModelDocuView.a···CDGELKAL
DI-624 Firmware Version Rev.2.53
Problems Resolved:
1. Fixed L2TP(PPPoE) connection problem.
2. Fixed shared key unstable with non-atheros client.
3. Fixed shared key unstable with TI Client.
4. Fixed traffic broadcast packet once WAN port and LAN port connect to same switch.
5. Fixed unstable when use Bigpond.
6. Fixed unstable when use E-Mule and BT.
7. Fixed connection between WPA with MacOS Airport unstable.
8. Fixed unable to access two French website:www.laronde.com & www.lemondialsaq.com.
9. Fixed rules name of Firewall can key-in the same name.
10. Fixed rules name of URL Filter can key-in the same key word
11. Modify Destination should be WAN , not LAN ,192.168.0.1 in the firewall page/allow to ping wan port.
12. Modify L2TP/PPTP "Server IP" name length can set to 32 character.
13. Modify NTP server update timeing, when user apply setting, NTP server will update immediately.
14. Move "Super-G", "SSID Broadcast", "802.11g Only" from "Performance" page to "Wireless" page.
15. Move DDNS selection from cable test page to Tools page.
16. Change WAN speed default setting to 10/100Mbps Auto.
17. Router will auto clear DHCP reserved IP once user change LAN IP address.
18. Remove Super-G with static function for Wi-Fi reason.
Enhancements:
1. Support ATMEL flash.
2. Add Multicast stream selection button in MISC page.
3. Add static and dynamic IP selection button in PPTP, L2TP page
4. Add Dial on demand and Auto-reconnect selection button in PPTP/L2TP page.
5. Add warning message in Wireless Page with Super G with Dynamic Turbo only operates in Channel 6.
6. Add WAN-L2TP, WAN-PPTP gateway selection in the Wizard/WAN/PPTP&L2TP page.
7. Add WMM(wireless QoS) function in the wireless page.
8. Add WPA2 function in the wireless page.
9. Add Web UI from (Dial On Demand/Auto-reconnect) to (Always-on/Manual/Connect-on demand) for PPPoE connection type (same with 624+).
Bwuutje. |
|
cpipojoe
join:2005-01-16 | Looks interesting if it does what it says
I will try it for sure !
Thanks for the info. |
|
aarono8
join:2003-01-10
Ottawa, ON | reply to Tsume
solid, totally solid firmware so far.
Wired to wireless is very fast, I am not getting any paeDisconnects, and wireless throughout is top notch as well.
this f/w may be the silver lining for the di624! |
|
quad0
join:2005-05-19
| reply to Tsume
Sorry to spoil your thrill guys, but im having the same "cant recive IP" problems as with the 2.52
I cant seem to find any solutions to this, other than turning encryption off - and I wont risk that
Therefore, back on 2.50, but wanting to go WPA2... any advice?  |
|
Silver_Wings
join:2005-05-05
Netherlands
1 edit | reply to Tsume
I gave it a shot and I'm pretty pleased with this one so far. I seem to get a stronger signal between my laptop and my di-624 compared to the build60 I was using before.
EDIT:
BTW I'm using Dynamic Turbo and WPA-PSK. |
|
Chip Zero
join:2004-09-18
NL
| reply to Bwuutje
said by Bwuutje :6. Fixed unstable when use E-Mule and BT. Note that this point and a lot of other points were not actual changes of 2.53 but of earlier releases (read the release notes for changes per release). So fellow eMule users: I wouldn't get your hopes up on finally getting Kad to work (stably) with this release.
Personally, I'm reluctant to install new firmware versions until a new version comes along that actually does something about this issue. Other than the Kad instability issue and some dropped packets, my 2.52b60 firmware is working fine and 100% stable. So the "if it ain't broken, don't fix it" principle applies here to some extend... |
|
