|
 michaelzhao
join:2004-04-17
Toronto, ON | Re: 2.53 on DLINK CANADA? I will upgrade.  :D:D | |
|
 | |
| | |
aarono8
join:2003-01-10
Ottawa, ON | this firmware A-OK here on my di-624 rev c1.
note: I DID do crash recovery. | |
|
| tquade
join:2000-10-14
Regina, SK | Re: 2.53 on DLINK CANADA? Installed and happy on a rev c.
Also installed the XP WPA2 hotfix along with the Atheros 4.0.0.167 driver only (no client or supplicant).
So far so good. | |
|
dynamx
join:2004-12-05
XXXXXX | doesn't save old settings but I use it only as an ap/switch. seems to be working okay so far but what is the wmm qos function in the wireless section? | |
|
xpwe
@migros.ch | Has anybody a release description? | |
|
bobbao
@61.49.x.x | Someone can give a copy to me? I can not download from it! | |
|
Tsume
join:2004-02-23
Johnson City, TN | If there were release notes for it, I'd have posted them 
Here ya go since you can't download it from the site for some reason. | |
|
|
| cpipojoe
join:2005-01-16 | Re: 2.53 on DLINK CANADA? Also, Why there are v2.53B69 & v2.53B69........???????? Sorry Talon88, I do not get it. You mention two times the same firmware number. Can you clarify your point.
Thanks. | |
|
| | |
Talon88
The One
join:2003-08-13
Toronto
 ·Bell Sympatico
4 edits | :::
Woo, D-Link Canada Released faster than US....!!
Unbelievable! 
F/W = 2.53, Build:0069
Date = Wed, 20 Apr 2005
CPU BSP: ar531x_wmm, 4.0.0.58, Oct, 27, 2004, build 0001
DRIVER: 1.0.0.0010, Mar, 10, 2005, build 0010
STACK: 1.0.0.1343, Apr, 07, 2005, Build 1344
AR5 F/W = ar531x_wmm, 4.0.0.167, 11:00, 11 Apr, 2005, Build 1025
AR5 Domain = 0x10, FCC1_FCCA
AR5 SSID = ?????
Watch Dog = 1
Restore Default = 0
Checksum = 0x0624b9f3
::: | |
|
Bwuutje
join:2005-01-10
| »tsd.dlink.com.tw/ModelDocuView.a···CDGELKAL
DI-624 Firmware Version Rev.2.53
Problems Resolved:
1. Fixed L2TP(PPPoE) connection problem.
2. Fixed shared key unstable with non-atheros client.
3. Fixed shared key unstable with TI Client.
4. Fixed traffic broadcast packet once WAN port and LAN port connect to same switch.
5. Fixed unstable when use Bigpond.
6. Fixed unstable when use E-Mule and BT.
7. Fixed connection between WPA with MacOS Airport unstable.
8. Fixed unable to access two French website:www.laronde.com & www.lemondialsaq.com.
9. Fixed rules name of Firewall can key-in the same name.
10. Fixed rules name of URL Filter can key-in the same key word
11. Modify Destination should be WAN , not LAN ,192.168.0.1 in the firewall page/allow to ping wan port.
12. Modify L2TP/PPTP "Server IP" name length can set to 32 character.
13. Modify NTP server update timeing, when user apply setting, NTP server will update immediately.
14. Move "Super-G", "SSID Broadcast", "802.11g Only" from "Performance" page to "Wireless" page.
15. Move DDNS selection from cable test page to Tools page.
16. Change WAN speed default setting to 10/100Mbps Auto.
17. Router will auto clear DHCP reserved IP once user change LAN IP address.
18. Remove Super-G with static function for Wi-Fi reason.
Enhancements:
1. Support ATMEL flash.
2. Add Multicast stream selection button in MISC page.
3. Add static and dynamic IP selection button in PPTP, L2TP page
4. Add Dial on demand and Auto-reconnect selection button in PPTP/L2TP page.
5. Add warning message in Wireless Page with Super G with Dynamic Turbo only operates in Channel 6.
6. Add WAN-L2TP, WAN-PPTP gateway selection in the Wizard/WAN/PPTP&L2TP page.
7. Add WMM(wireless QoS) function in the wireless page.
8. Add WPA2 function in the wireless page.
9. Add Web UI from (Dial On Demand/Auto-reconnect) to (Always-on/Manual/Connect-on demand) for PPPoE connection type (same with 624+).
Bwuutje. | |
|
| cpipojoe
join:2005-01-16 | Re: 2.53 on DLINK CANADA? Looks interesting if it does what it says
I will try it for sure !
Thanks for the info. | |
|
| Chip Zero
join:2004-09-18
NL
| said by Bwuutje  :6. Fixed unstable when use E-Mule and BT. Note that this point and a lot of other points were not actual changes of 2.53 but of earlier releases (read the release notes for changes per release). So fellow eMule users: I wouldn't get your hopes up on finally getting Kad to work (stably) with this release.
Personally, I'm reluctant to install new firmware versions until a new version comes along that actually does something about this issue. Other than the Kad instability issue and some dropped packets, my 2.52b60 firmware is working fine and 100% stable. So the "if it ain't broken, don't fix it" principle applies here to some extend... | |
|
aarono8
join:2003-01-10
Ottawa, ON | solid, totally solid firmware so far.
Wired to wireless is very fast, I am not getting any paeDisconnects, and wireless throughout is top notch as well.
this f/w may be the silver lining for the di624! | |
|
quad0
join:2005-05-19
| Sorry to spoil your thrill guys, but im having the same "cant recive IP" problems as with the 2.52
I cant seem to find any solutions to this, other than turning encryption off - and I wont risk that
Therefore, back on 2.50, but wanting to go WPA2... any advice?  | |
|
Silver_Wings
join:2005-05-05
Netherlands
1 edit | I gave it a shot and I'm pretty pleased with this one so far. I seem to get a stronger signal between my laptop and my di-624 compared to the build60 I was using before.
EDIT:
BTW I'm using Dynamic Turbo and WPA-PSK. | |
|
hqh51
join:2001-03-24
Manassas, VA | Will flash to new version of the firmware. Sad thing is that they had to remove static turbo. | |
|
|
xpwe
@intergga.ch | Re: 2.53 on DLINK CANADA? what exactly was static turbo? | |
|
Jellen
join:2004-08-19
Belgium
| Static turbo means channel bonding is ALWAYS on, not only when there is alot of data bandwith needed.
Don't know why they remove that, its on all their boxes, 108mbps! only way to be able to achieve half of that is with static turbo...
Anyway, my computer is few rooms away and i get a 85% signal (says atheros) but when I turn dynamic turbo on and it switches to 108mpbs, speeds drop to few 100kb/sec instead of 2.5MB/sec when dynamic turbo is off.
Weird thing...
--
visit my blogsite at: »jellen.blogspot.com | |
|
| |
| | |
stefan_f_a
join:2005-05-05 | Anyone know if this will fix the reboot issue in 2.52b60 that i'm experiencing ? | |
|
|
Talon88
The One
join:2003-08-13
Toronto | Re: 2.53 on DLINK CANADA? :::
Yes, & you should try to find a clean Channel to
stop the reboot cause by interference.
::: | |
|
stefan_f_a
join:2005-05-05 | there aren't any other wireless routers around here.
so i can't imagine what could cause the interference. | |
|
| Bwuutje
join:2005-01-10 | Re: 2.53 on DLINK CANADA? "so i can't imagine what could cause the interference."
wireless telephone e.g. if not yours maybe your neighbour's ?
Bwuutje. | |
|
stefan_f_a
join:2005-05-05 | Oh crap.
I just upgraded.
And now it reboots every 10 seconds instead of every other hour.
What an upgrade =)
I'm gonna try and change channel . To see if that helps. | |
|
randalla
join:2004-04-15
South San Francisco, CA | I upgraded mine and changing channels stopped the rebooting. I was at 11 and changed to 9. It's been stable for a couple of days now. | |
|
Tsume
join:2004-02-23
Johnson City, TN | Stefan- sometimes upgrades do that to me too [roughly 20% chance- doesn't matter the version]
I would take off the antenna, let the router rest unplugged for about 5 minutes, plug it in, and do talon88's crash recovery to upgrade to 2.53. | |
|
stefan_f_a
join:2005-05-05 | I've decided to return this product.
I don't have the energy to keep up this troubleshooting all the time.
Thanks for all your help ! | |
|
|
|
|
·
·
