Computer don't see each other after moving to WPA2

Forums » Equipment Support » Hardware By Brand » D-Link » Computer don't see each other after moving to WPA2


Uniqs: 390	Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·Read This Before Posting! ·D-Link FAQ ·DLink Connection Monitor Utility 1.7.97

DWL-G800AP and DWL-G810 interchangeable? »
« [Help Me] Is my DI-524 + DWL-G630 WLAN speed typical or not?

Tony_M

join:2002-02-11
North York, ON

Computer don't see each other after moving to WPA2

Here's what I have, a DI-624 and 2 computers with DWL-G520.
Both running WinXP, D-Link latest drivers and the WPA2 update from Microsoft.

They could share drives and printer before but after moving to WPA2 they won't. They both run on static IPs and I changed nothing but the NIC driver and encryption.

Any ideas on what needs to be looked at? Thanks.

permalink · 2005-08-03 16:08:02 ·

funchords
Hello
Premium,MVM
join:2001-03-11
Washington, DC

·Verizon Online DSL

·Skype

Re: Computer don't see each other after moving to WPA2

When you change drivers, the system behaves as if you installed brand new hardware. So be sure that any previous settings you had for the SP2 firewall are still set. Adapter-specific settings (which usually isn't the way most people configure the firewall) would be lost.

Reboot the machines.

If the machines connect to the internet okay, then just wait about a half-hour. More than likely, they'll sort everything out. If not, then check the Event Viewer (eventvwr.msc) and look for references to NETBT or BROWSER.
--
Robb Topolski

http://www.funchords.com/

Hillsboro, Oregon USA
They who would give up an essential liberty for temporary security, deserve neither liberty or security

permalink · 2005-08-03 16:12:17 · Print ·

Tony_M join:2002-02-11 North York, ON	Re: Computer don't see each other after moving to WPA2 Thanks for the tips. Will give them a try and see what happens. That event viewer sounds helpful. Thanks again.
	permalink · 2005-08-03 16:23:05 ·

funchords
Hello
Premium,MVM
join:2001-03-11
Washington, DC

·Verizon Online DSL

·Skype

Re: Computer don't see each other after moving to WPA2

You're welcome ...

Someone did the math once, but I think it came out to 19 minutes for a Windows File and Printer Sharing (Broadcast Browser-based network) to detect a failure, force an election, and restore the network browser. That's why I say about 30 minutes -- 20 seems to close and if just one thing goes wrong ...

...good luck
--
Robb Topolski

http://www.funchords.com/

Hillsboro, Oregon USA
They who would give up an essential liberty for temporary security, deserve neither liberty or security

permalink · 2005-08-03 16:26:39 · Print ·

Tony_M join:2002-02-11 North York, ON	Re: Computer don't see each other after moving to WPA2 Awesome! I did not have any firewall running on any of the computers so that was not it, however they did eventually found each other, thanks a lot.
	permalink · 2005-08-03 23:52:09 ·

your comment..

Forums » Equipment Support » Hardware By Brand » D-Link	DWL-G800AP and DWL-G810 interchangeable? » « [Help Me] Is my DI-524 + DWL-G630 WLAN speed typical or not?


Thursday, 03-Dec 10:48:54	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF