how-to block ads
|
Naftali5
@optonline.net
| Re: [DTA310] Firmware Recovery Thread Yes I am saying I haven't found one which installs 010208 downloader
Way it works for me, every packet8 firmware installs along with it a new downloader, leadtek does not. Any time i had mismatched which didn't work, flash with any packet8 and it works. problem is leadtek 18D seems to be picky, and only works on oem leadtek downloader, which you only get if you BUY the unit from leadtek, and lose once you flash with any packet8, or the one packet8 downloader it liked was 010208.
How did you set the msg waitng Notify to work with AR16O?
Also dial plan works fine for me on packet8 12.35 unlocked
x.T|*.T basically allows me to dial anything even if it starts with *
how do you set dial plans on the leadtek firmware?
their site was not much help to me...
»www.leadtek.com.tw/eng/support/s···ial+plan
Included screen shots of leadtek AR18D on dta310
I've tried hard and not managed to lock up any dta310.
try one packet8 after another (auto downloaders will only work if current firmware is packet8) until one takes, then use 12.35unl to unlock it and the put what you want on.
naftali | |
|  rizzo2dial
Premium
join:2004-08-05 | Re: [DTA310] Firmware Recovery Thread Do you know which Packet8 frmware you had on your DTA310 before uploading AR18D? Based on what you wrote above, it sounds like you switched it to 12.35unl then AR818D. Is this correct?
Thanks,
Rizzo | |
| |
Naftali5
@optonline.net
| Re: [DTA310] Firmware Recovery Thread No, I upgraded one new adapter to AR18D
and did not check the version b4.
the next adapter while upgrading said page can't be displayed.
assuming it was a problem , i flashed it with AR17
it will not take AR18.
the "problem" turns out was that the ip changed from app mode to download mode, because its hostname changed.
easiest way around this is to reboot into download mode.
find it.
then flash.
naftali | |
| | | |
|
