4 edits | reply to carrol
Re: Vbuzzer on DTA310thanks, it works
and for sipura, stun is not required.
set port to 80, 5090 is not correct anymore.
see below for detail
my dialplan string
(*xx|<911:1&&&&&&&&&&>|[3469]11|0|00|<:1???>[2-9]xxxxxx|<:1>xxx[2-9]xxxxxxS0
|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
replace &&&&&&&&&& with your local police office number.
replace ??? with your area code to enable 7-digit local dialing |
|
| here is the conf for my sipura2100 |
|
|
|
| reply to happyvalley
i have DTA version 12.35 .can you post your settings? or upgrade version for dta , or what is setting on your dta |
|
| reply to carrol
How can i use DTA 310 (version 12.35) to use V Bu service? |
|
cgigate
join:2003-05-12
Fort Worth, TX
3 edits | reply to Packetloss
said by Packetloss:I love being the only one that replies to my post, I found out how to make Vbuzzer work with the DTA310 Are you sure that you made it (DTA310) work om Vbuzzer ?
Actually DTA310 does not allow to set SIP to port:80 that Vbuzzer required ! (see picture)
or could you post the setting screen snapshot? |
|
cgigate
join:2003-05-12
Fort Worth, TX | reply to langoo
said by langoo:How can i use DTA 310 (version 12.35) to use V Bu service? I believe DTA310 cannot be used for Vbuzzer service! |
|
rock_on
join:2005-01-26
Colpitts Settlement, NB | reply to cgigate
Hi cgigate,
I've encountered the same problem with VBuzzer. I've tried two different flavors of the firmware (12.35 + BVA8052) however, neither allowed me to set port 80. Having said that, the ports allowed on each firmware differed which got me thinking, maybe I could modify the firmware myself? Anyways, I tried doing so in notepad but couldn't get the firmware files to open correctly. I really don't know how to do it but am confident that someone in this forum would know.
Any takers?
--
www.netphonedirectory.com
Specializing in PC to Phone and PC to PC VoIP |
|
rcilinkPremium
join:2003-12-15
Manchester, NH | OK, fine.
Attached is vbuzzer.bin. It is a 12.35 look-alike with the port range set to go as low as 79...
give it a spin.. I make no guarantees it will do what you want, but what the heck.. that's the fun of it! |
|
rock_on
join:2005-01-26
Colpitts Settlement, NB | OK, fine.
Attached is vbuzzer.bin. It is a 12.35 look-alike with the port range set to go as low as 79...
give it a spin.. I make no guarantees it will do what you want, but what the heck.. that's the fun of it!
Once again, rcilink comes through and saves the day!
I just used the modified firmware to successfully register my DTA310 with VBuzzer via port 80. Initially, I could dial out except that the line would just ring endlessly. The only way I could get it to work normally was to enter my user name in both the 'phone number' and 'caller id name' boxes as well.
Cheers
--
www.netphonedirectory.com
Specializing in PC to Phone and PC to PC VoIP |
|
cgigate
join:2003-05-12
Fort Worth, TX
3 edits | Great job to alter the firmware.
It can get registed on Vbuzzer.
Still have problem to make/receive PSTN local call (to/from Toronto area 416 area code)! |
|
rock_on
join:2005-01-26
Colpitts Settlement, NB | reply to rcilink
said by rcilink:OK, fine. Attached is vbuzzer.bin. It is a 12.35 look-alike with the port range set to go as low as 79... give it a spin.. I make no guarantees it will do what you want, but what the heck.. that's the fun of it! Ok, for anyone who's interested, I screenshot the update to rcilink's latest firmware as well as the settings that I used to configure my DTA310 with VBuzzer. They can be accessed here:
»www.netphonedirectory.com/vbuzzerdta310.htm
Cheers
--
www.netphonedirectory.com
Specializing in PC to Phone and PC to PC VoIP |
|
cgigate
join:2003-05-12
Fort Worth, TX
4 edits | Nice job!
I don't know why the Vbuzzer is so special.
It is very difficult to make/receive local call (416 area code), but it can receive non-local call (I tested Stanaphone NY phone # to Vbuzzer on DTA310, it works fine), but it cannot call (endless ringback or busy) to my home phone and cell (416 area code).:(
Only the Vbuzzer softphone is working fine for everything! |
|
| reply to Packetloss
I got Vbuzzer working 50% with DTA310. I can recive calls but canno make outgoing call ... it just rings and rings. Help.:( |
|
rock_on
join:2005-01-26
Colpitts Settlement, NB | Hi Oscar4572,
Did you try entering your VBuzzer username in both the 'Phone Number' and 'Caller ID' boxes in the DTA-310 SIP Settings? I know it sounds wacky however I had the same problem that you're experiencing until I did just this.
Cheers
--
www.netphonedirectory.com
Specializing in PC to Phone and PC to PC VoIP |
|
3 edits | reply to Packetloss
I make sure VBuzzer username in both the 'Phone Number' , 'Caller ID' and 'User Name' boxes in the DTA-310 SIP Settings.
when making outgoing calls, keep ringing, then after a minute or two, fast busy.
I try calling my vbuzzer number, only 1 out of almost 50 calls, yes almost 50 calls, went through with some static on the line. the rest either fast busy or said "45-3, we are sorry, the number you dialed is invalid... " |
|
| reply to Packetloss
I just tried again with pap2 using the voxilla wizard at »voxilla.com/pap2config.php and got the exact same problems. |
|
rock_on
join:2005-01-26
Colpitts Settlement, NB | reply to VOIPnYC6
Hi VOIPnYC,
Hmmmm. Do you have the correct codecs enabled? I deselected G723/G729 and put down G711U as the primary and G711A as the secondary. Another thing you may want to check is whether the problem lies with your network/router. Try putting your DTA310 in your router's DMZ and see if this solves the problem.
Cheers
--
www.netphonedirectory.com
Specializing in PC to Phone and PC to PC VoIP |
|
zazen
join:2005-06-12
75500 | reply to carrol
try www.voxilla.com
If you get a free account there, you can get configurations at least for Sipura devices for Vbuzzer service.
Arsalan |
|
| reply to carrol
I set those settings but when I call my vbuzzer phone number from a regular phone, I hear nothing not tone not busy not ringing from my regular phone (while the x-lite is ringing loud and clear), only after some seconds, my phone makes the sound that it is making a call, but if I answer with x-lite, my phone is still not conected to the x-lite number.
I can make outbound calls though from my vbuzzer/x-lite phone. |
|
krishn
join:2004-11-05
Brant Lake, NY | reply to rcilink
hi,
I downloaded your hacked firmware so that it would accept port 80. it worked fine and the device keeps itself registered, never a busy signal and everything was perfect, thanks for that. One small problem though, I dont get heavy bandwidth where I live and I want to use G729 but the thing is the hacked firmware by default enables G711 both a and u law could you please do a big favor to all of us and hack the firmware AR160 so that I can select ONLY G729 and use vbuzzer with that? i would be pleased and am thankful to you in advance.
Krishn |
|
