funchords
Hello
Premium,MVM
join:2001-03-11
Washington, DC
 ·Verizon Online DSL
 ·Skype
| reply to laserfan
Re: DI-524 bios 1.05 disconnects
said by laserfan  :Robb as you have followed this thread, I wanted to add that AFTER I got an RMA to send-back my brand-new DI-524 (buy.com) for its random resets, it occurred to me that: maybe the 524, wired & used as an access point only (no WAN connection) should never have been asked to issue "Static DHCP" at all to my wireless client? That's true. DHCP should have been off -- issuing no dynamic or static IPs.
The log would not have picked this up.
--
Robb Topolski  http://www.funchords.com/  Hillsboro, Oregon USA
Dear Anonymous, Thank you!!! Thank you!!! |
|
laserfan
join:2005-01-14
Blanco, TX
| reply to funchords
Robb as you have followed this thread, I wanted to add that AFTER I got an RMA to send-back my brand-new DI-524 (buy.com) for its random resets, it occurred to me that: maybe the 524, wired & used as an access point only (no WAN connection) should never have been asked to issue "Static DHCP" at all to my wireless client? My main WAN gateway/router is a Linksys, and altho I have DHCP disabled on the Linky, maybe I should never have asked the 524 to issue IPs? Then again even w/all Log options selected, there was nothing in the log to suggest any problem.
OK so I disabled DHCP completely on the 524, then set the Linky to DHCP an IP to my wireless client (via the 524 I mean of course) and while it worked fine I didn't leave it "up" in this configuration long enough to see if I got any further resets. I'd already bought a new AP today and was anxious to set it up in the 524's place.
This is my final nagging thought about this--I hate to give-up on a product, but I'll be sending the 524 back anyway without doing any more testing.  |
|
