davidpaj
join:2002-04-22 | Deliberant 1300 falls "asleep"
I have a 1300 as an AP, works well, except sometimes it "drops" all clients...... go in the ap, do a site survery and it reassociates all. Thie is a new one.... anyone else seen this issue? |
|
IntraLink
Premium,MVM
join:2002-08-14
Utah Valley | Haven't seen it, but for an AP that is intolerable.
You need to replace it. I'm sure Caleb will work with you on that. Since the 1300 is discontinued, you might want to trade up to a 2300 while you're at it! |
|
davidpaj
join:2002-04-22
| said by IntraLink  :Haven't seen it, but for an AP that is intolerable. You need to replace it. I'm sure Caleb will work with you on that. Since the 1300 is discontinued, you might want to trade up to a 2300 while you're at it! I'll see what he has to say... Thing is as long as there's "activity" on it... It won't fall asleep |
|
bito
Premium
join:2001-10-08
Atlanta, GA | reply to davidpaj
Sounds new to me too. What clients are you using? How many? What version of the firmware? |
|
davidpaj
join:2002-04-22
| said by bito :Sounds new to me too. What clients are you using? How many? What version of the firmware? I'm using firmware 1.63. I have two 1300's as clients and one Linksys Wet11. Everybody stays associated, then everyboy gets dropped after X amount of time. Do a site survey on the AP..... Everybody comes back again. |
|
Chele
join:2003-07-23 | reply to davidpaj
This happens to us with the 2300's if the SSID is not broadcast. We have several 1300's without that issue though. Try broadcasting the SSID see if it helps. |
|
davidpaj
join:2002-04-22
| reply to davidpaj
said by davidpaj :said by bito :Sounds new to me too. What clients are you using? How many? What version of the firmware? I'm using firmware 1.63. I have two 1300's as clients and one Linksys Wet11. Everybody stays associated, then everyboy gets dropped after X amount of time. Do a site survey on the AP..... Everybody comes back again. Could this help? If you go to show clients, you see they are conntected...... But the expired time is counting down... When it runs out....... they all drop. |
|
dongato17
VIP
join:2000-07-28
Atlanta, GA
| reply to Chele
The problem with the 2300 has been identified as a WLAN driver bug in the realtek driver, and we are waiting for the fix from them. This is the first time we have had this problem come up for the 1300, which is a different WLAN driver.
What is the X in the X amount of time? Do you see it at specific intervals?
Also, please install the latest firmware (1.6.4) from this site:
»support.deliberant.com/ShowPost.···stID=217
Scroll to the bottom of the page for 1.6.4.
Let us know if you continue to have problems!
-Hal
--
Harold Bledsoe
Deliberant Wireless
»www.deliberant.com |
|
davidpaj
join:2002-04-22
| said by dongato17 :The problem with the 2300 has been identified as a WLAN driver bug in the realtek driver, and we are waiting for the fix from them. This is the first time we have had this problem come up for the 1300, which is a different WLAN driver. What is the X in the X amount of time? Do you see it at specific intervals? Also, please install the latest firmware (1.6.4) from this site: » support.deliberant.com/ShowPost.···stID=217Scroll to the bottom of the page for 1.6.4. Let us know if you continue to have problems! -Hal Yes, it counts down second by second...Even after a 1.64 upgrade it's still doing it.. It used to never count down till this started. If there's traffic on the AP all works fine |
|
bito
Premium
join:2001-10-08
Atlanta, GA | After it drops the clients, can they still get back on if they try to initiate any sort of traffic? |
|
davidpaj
join:2002-04-22
| said by bito :After it drops the clients, can they still get back on if they try to initiate any sort of traffic? No, I was thinking they could, but the connection is dead until a site survey is done on the AP. Once that is done if traffic is constant enough to beat the expire timer... everything is fine |
|
bito
Premium
join:2001-10-08
Atlanta, GA | Did this just start happening? |
|
davidpaj
join:2002-04-22
| said by bito :Did this just start happening? Yes, the AP had been turned on maybe 20 minutes at most and it just started. |
|
uscomputing
join:2005-01-26
Buffalo, NY | reply to davidpaj
Can you temporarily set a pc to ping the AP so the traffic never goes dead? |
|
davidpaj
join:2002-04-22
| said by uscomputing :Can you temporarily set a pc to ping the AP so the traffic never goes dead? That's the only solution so far I found so far |
|
