aryoba
Premium,MVM
join:2002-08-22
| reply to bigdogg2
Re: 2610 Cisco / WIC 1ENET Issues
If you wish, you can use the onboard Ethernet 0/0 port of the 2610 to do inter-VLAN routing and trunking. Yes, a 10 MBps interface of a router can do inter-VLAN routing and trunking (with some limitation of course).
I have a 2610 run IOS image of IP FW/VPN/3DES/IDS PLUS version 12.3.12a that is currently setup for inter-VLAN routing and trunking with dot1q encapsulation, using the onboard Ethernet 0/0 port.
However if you still wish to get another Ethernet module for the 2610, get NM-1FE-TX. You should be able to find one from ebay. |
