aryoba
Premium,MVM
join:2002-08-22
| reply to jatsss
Re: [HELP] my SOHO91 only boots to ROMmon what should I do
When I say "0x2141" I meant 0x2142 (the correct one). I guess I was in a hurry to respond your question 
Well, as long as you get it right and working; no harm done. After all, it is kind of fun experimenting with config register value 
Now to answer the next questions, backup IOS from router to TFTP Server and vice versa. There are infos in this forum's FAQ as follow
Detail:
»Cisco Forum FAQ »How do I upgrade a Cisco router IOS image or to backup to my computer?
Quick Guide:
»Cisco Forum FAQ »Securing access to routers with AAA commands |
|
jatsss
join:2005-09-15 | Thank you very much aryoba, its all working now.. For now, Im looking a sample configuration of my netmodem,router,bluecoat....I posted it in another topic but it seems noone answers... can you happen to give me hints??? |
|
aryoba
Premium,MVM
join:2002-08-22 | Can you post
1) your network setup (which connect to where)?
2) the router's configuration file (show running-config)?
Now tell how you connect to your ISP? DHCP? Static IP address? PPP? |
|
jatsss
join:2005-09-15
| I have the following:
1.Netmodem plus II
2.SOHO91 router (noconfig)
3.BLUECOAT SG400 (noconfig)
All is from scratch(default) execpt the netmodem who is fully operational.
Beginning from vsat connected to netmodem. The netmodem is up and running with a static public ip.
From netmodem connected to E1 of the router via RJ45.
E0 is a static private ip. This router has no running config yet. Im still reading and researching if the SOHO91 has a built in DHCP server or not.. OR my BLUECOAT SG400 can handle DHCP or not... Can you suggest from this point? |
|
