Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe
1 edit | reply to 614 freak
Re: connection a speedstream 5660 to a dlink -614+ ?
»subscriber.communications.siemen···t.shtml# |
|
614 freak
@Red-80-34-171.pooles
| reply to Mountaineer1
Re: connection a speedstream 5660 to a dlink -614+
Tried,but no result . In bridge mode ,the 5660 cant set gateway .. at least on http configuration,on console you can but i think it ignores it.
So if i put the 5660 on bridge,i must set on the dlink all the data from the isp ..so the 5660 does something ?? I dont see it.... i'll appreciate some manual .. or some succesful config from another router,perhaps i only need a clear point of view.
Thanks! |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | reply to 614 freak
Re: connection a speedstream 5660 to a dlink -614+ ?
Put the Static IP address,subnet mask,Gateway,and DNS information supplied by your ISP into the Router |
|
614 freak
@Red-80-34-171.pooles
| reply to Mountaineer1
Re: connection a speedstream 5660 to a dlink -614+
yes,i tried,but there're some problems:
put the 5660 on bridge mode , ethernet ip 172.26.0.1,
mask 255.255.255.0
Put the 614's wan ip 172.26.0.2 , mask 255.255.255.0 ,
gateway 172.26.0.1 and ethernet ip 192.168.0.1
all my machines are sitting after the 614,so they've got ips 192.168.0.x.
But i cant get anywhere with that .. i cant see where i'm wrong...any clue? |
|
Mountaineer1
Big WVU Fan
Premium,MVM
join:2002-01-12
Universe | reply to 614 freak
Re: connection a speedstream 5660 to a dlink -614+ ?
Yes,bridge the 5660.Then use the Dlink to setup your static IP. |
|
614 freak
@Red-80-34-171.pooles
| I just acquired a 614+ ,and want to connect it to a ss5660 acting as a modem...but....how can i do it ?
May I set the 5660 to bridged ? I REALLY need some help starting,i tried some things but didnt work.
My ISP offers me static ip , RFC1843.
Any help will be appreciated. |
|
