Search:  

 
theme to black backgroundlet page decide theme
HomeFind ServiceReviewsISP NewsFAQsForumsToolsDatabaseAbout 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » D-Link » Problems with DGL-4300
Search Topic:
 Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Links: ·Read This Before Posting! ·D-Link FAQ ·DLink Connection Monitor Utility 1.7.97
[Help Me] Installed D-Link router,trouble with ema »
« I think I pushed DI-624 to its limit - 2350...  
AuthorAll Replies


pleekmo
Triptoe Through The Tulips
Premium
join:2001-09-14
Manchester, CT
clubs:

reply to mercury26
Re: Problems with DGL-4300

said by mercury26 See Profile :

Error:
Failed to establish listen on port 6969.
Check that other applications aren't already using this port.
Also check for another copy of Azureus running.

Error:
Failed to establish listen on port UDP:6881.
Check that other applications aren't already using this port.
Also check for another copy of Azureus running.
I'd had similar errors when I'd used an old NetworkEverywhere router which could supposedly implement uPnP, but I seemed able to connect to servers, torrents, and trackers just fine. My suspicion was that Azureus was attempting to open the ports before the router was ready to handle it. You may wish to open Azureus and click in the menu bar Plugins -> uPnP and view the messages there.

Here's mine, for instance (with suitable removals):

Status:Running

UPnP::SSDP: ignoring loopback address /127.0.0.1
UPnP::SSDP: ignoring loopback address /0:0:0:0:0:0:0:1
UPnP::SSDP: ignoring IPv6 address /xxx:0:0:0:0:0:0:1%1
UPnP::SSDP: group = /xxx.255.255.250:0/eth0:Intel(R) PRO/1000 MT Network Connection-/xxx.xxx.xxx.xxx,/xxx:xxx:xxx:xxx:xxx:xxx:xxx:xxx%4
UPnP::SSDP: ignoring IPv6 address /xxx:xxx:xxx:xxx:xxx:xxx:xxx:xxx%4
UPnP::SSDP: ignoring IPv6 address /xxx:xxx:xxx:xxx:xxx:xxx:xxx:xxx
UPnP::SSDP: ignoring IPv6 address /xxx:xxx:xxx:xxx:xxx:xxx:xxx:xxx%6
UPnP::SSDP: ignoring IPv6 address /xxx:xxx:xxx:xxx:xxx:xxx:xxx:xxx%2
Mapping request: UDP tracker client port (UDP/6881), enabled = true
Mapping request: Incoming Peer Data Port (TCP/6881), enabled = true
Mapping request: TCP Tracker Port (TCP/6969), enabled = true
Mapping request: TCP SSL Tracker Port (TCP/7000), enabled = false
Mapping request: UDP Tracker Port (UDP/6969), enabled = false
Mapping request: Distributed DB (UDP/6881), enabled = true
UPnP:SSDP: first response:
HTTP/1.1 200 OK
EXT:
SERVER: ipOS/6.4, UPnP/1.0, ipSSDPDevice/1.0
ST: upnp:rootdevice
LOCATION: »xxx.xxx.xxx.xxx/getxml?file=/root.xml
CACHE-CONTROL: max-age=1800
USN: uuid: [removed]::upnp:rootdevice
Content-Length: 0

UPnP: root discovered = »xxx.xxx.xxx.xxx/getxml?file=/root.xml, local = /xxx.xxx.xxx.xxx
Downloading: »xxx.xxx.xxx.xxx/getxml?file=/root.xml
Relative URL base is »xxx.xxx.xxx.xxx
GamerLounge DGL-4300 Wireless 108G Gaming Router
»xxx.xxx.xxx.xxx/getxml?file=/l3fw.xml, »xxx.xxx.xxx.xxx:4444/l3fw
WANDevice
»xxx.xxx.xxx.xxx/getxml?file=/WAN···IFC1.xml, »xxx.xxx.xxx.xxx:4444/wcommifc
WANConnectionDevice *
»xxx.xxx.xxx.xxx/getxml?file=/WANIPConn1.xml, »xxx.xxx.xxx.xxx:4444/wipconn
Found WANConnectionDevice
Found WANIPConnection
Downloading: »xxx.xxx.xxx.xxx/getxml?file=/WANIPConn1.xml
mapping [0] 53444/UDP [svchost (xxx.xxx.xxx.xxx:1041) 53444 UDP] -> xxx.xxx.xxx.xxx
mapping [1] 6892/TCP [BT-z-Fq] -> xxx.xxx.xxx.yyy
mapping [2] 36816/UDP [svchost (xxx.xxx.xxx.yyy:4183) 36816 UDP] -> xxx.xxx.xxx.yyy
mapping [3] 6893/TCP [BT-LYuw] -> xxx.xxx.xxx.yyy
mapping [4] 6895/TCP [BT-FthO] -> xxx.xxx.xxx.yyy
UPnP: Mapping 'UDP tracker client port (UDP/6881)' established
UPnP: Mapping 'Incoming Peer Data Port (TCP/6881)' established
UPnP: Mapping 'TCP Tracker Port (TCP/6969)' established
Mapping Distributed DB (UDP/6881) already established

with a well-working connection.
to forum · permalink · · 2005-09-19 18:52:43 · Reply to this

mercury26

join:2005-09-19
Broomfield, CO

 Ok, here are the results for my UPnP Log. Does ths help at all? I am still having NAT Issues.

Also, does anyone know how to completely reset the Azureus settings. A complete uninstall did not work, nor clearing the registry. Where are the settings kept at?

Thanks,

Chuck

UPnP::SSDP: ignoring loopback address /127.0.0.1
UPnP::SSDP: group = /239.255.255.250:0/eth1:Belkin Gigabit Desktop Card - Packet Scheduler Miniport-/192.168.0.142
Mapping request: UDP tracker client port (UDP/6881), enabled = true
Mapping request: Incoming Peer Data Port (TCP/6881), enabled = true
Mapping request: TCP Tracker Port (TCP/6969), enabled = true
Mapping request: TCP SSL Tracker Port (TCP/7000), enabled = false
Mapping request: UDP Tracker Port (UDP/6969), enabled = true
Mapping request: Distributed DB (UDP/6881), enabled = true
UPnP:SSDP: first response:
HTTP/1.1 200 OK
EXT:
SERVER: ipOS/6.4, UPnP/1.0, ipSSDPDevice/1.0
ST: upnp:rootdevice
LOCATION: »192.168.0.1/getxml?file=/root.xml
CACHE-CONTROL: max-age=1800
USN: uuid:83EA8F24-BE12-3E7C-87CE-181927911B83::upnp:rootdevice
Content-Length: 0

UPnP: root discovered = »192.168.0.1/getxml?file=/root.xml, local = /192.168.0.142
Downloading: »192.168.0.1/getxml?file=/root.xml
Relative URL base is »192.168.0.1
GamerLounge DGL-4300 Wireless 108G Gaming Router
»192.168.0.1/getxml?file=/l3fw.xml, »192.168.0.1:4444/l3fw
WANDevice
»192.168.0.1/getxml?file=/WANCommonIFC1.xml, »192.168.0.1:4444/wcommifc
WANConnectionDevice *
»192.168.0.1/getxml?file=/WANIPConn1.xml, »192.168.0.1:4444/wipconn
Found WANConnectionDevice
Found WANIPConnection
Downloading: »192.168.0.1/getxml?file=/WANIPConn1.xml
mapping [0] 21/TCP [FTP] -> 192.168.0.142
mapping [1] 3389/TCP [REMOTE DESKTOP] -> 192.168.0.142
UPnP: Mapping 'UDP tracker client port (UDP/6881)' established
UPnP: Mapping 'UDP tracker client port (UDP/6881)' established
UPnP: Mapping 'Incoming Peer Data Port (TCP/6881)' established
UPnP: Mapping 'Incoming Peer Data Port (TCP/6881)' established
UPnP: Mapping 'TCP Tracker Port (TCP/6969)' established
UPnP: Mapping 'TCP Tracker Port (TCP/6969)' established
UPnP: Mapping 'UDP Tracker Port (UDP/6969)' established
UPnP: Mapping 'UDP Tracker Port (UDP/6969)' established
Mapping Distributed DB (UDP/6881) already established
UPnP: reset
UPnP: Lost connection to service 'WANIPConnection' on UPnP device '192.168.0.1'
UPnP: root discovered = »192.168.0.1/getxml?file=/root.xml, local = /192.168.0.142
Downloading: »192.168.0.1/getxml?file=/root.xml
Relative URL base is »192.168.0.1
GamerLounge DGL-4300 Wireless 108G Gaming Router
»192.168.0.1/getxml?file=/l3fw.xml, »192.168.0.1:4444/l3fw
WANDevice
»192.168.0.1/getxml?file=/WANCommonIFC1.xml, »192.168.0.1:4444/wcommifc
WANConnectionDevice *
»192.168.0.1/getxml?file=/WANIPConn1.xml, »192.168.0.1:4444/wipconn
Found WANConnectionDevice
Found WANIPConnection
Downloading: »192.168.0.1/getxml?file=/WANIPConn1.xml
mapping [0] 6881/UDP [Azureus UPnP 6881 UDP] -> 192.168.0.142
mapping [1] 6881/TCP [Azureus UPnP 6881 TCP] -> 192.168.0.142
mapping [2] 6969/TCP [Azureus UPnP 6969 TCP] -> 192.168.0.142
mapping [3] 6969/UDP [Azureus UPnP 6969 UDP] -> 192.168.0.142
mapping [4] 21/TCP [FTP] -> 192.168.0.142
mapping [5] 3389/TCP [REMOTE DESKTOP] -> 192.168.0.142
Mapping UDP tracker client port (UDP/6881) already established
Mapping Incoming Peer Data Port (TCP/6881) already established
Mapping TCP Tracker Port (TCP/6969) already established
Mapping UDP Tracker Port (UDP/6969) already established
to forum · permalink · · 2005-09-19 19:32:45 · Reply to this


pleekmo
Triptoe Through The Tulips
Premium
join:2001-09-14
Manchester, CT
clubs:

1 edit		 This looks good except for this brief item:

UPnP: reset
UPnP: Lost connection to service 'WANIPConnection' on UPnP device '192.168.0.1'

You may wish to attempt to determine what caused this, though it appears that he uPnP connection was re-established.

I think you will have to learn to ignore the error messages.

Edit: Stupid proofreading lapse.
to forum · permalink · · 2005-09-19 19:42:50 · Reply to this

mercury26

join:2005-09-19
Broomfield, CO		 I am not worried about the error messages. I am worried about the NAT Error message in the NAT Testing tool. The tracker I am connected to is listing me as non-connectable.

Thanks,

:: Chuck
to forum · permalink · · 2005-09-19 19:44:08 · Reply to this


pleekmo
Triptoe Through The Tulips
Premium
join:2001-09-14
Manchester, CT
clubs:		 Perhaps the tracker is using non-standard ports?...
to forum · permalink · · 2005-09-19 19:45:16 · Reply to this

mercury26

join:2005-09-19
Broomfield, CO		 Hmmm, I do not believe so, but I will check. It used to work with my Microsoft Wireless router. I only started to experience this issue after I switched to the D-Lnk router.

Thanks,

:: Chuck
to forum · permalink · · 2005-09-19 20:03:16 · Reply to this
Forums » Equipment Support » Hardware By Brand » D-Link[Help Me] Installed D-Link router,trouble with ema »
« I think I pushed DI-624 to its limit - 2350...  

Tuesday, 10-Nov 03:47:09 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [83] VoIP Over 3G Still Not Working For iPhone
· [81] Verizon Keeps Swinging At AT&T
· [33] Bill Would Force ISPs To Block Financial Scams
· [24] Mediacom Hints At 50, 100 Mbps Speeds
· [14] Clearwire To Get Another $1.5 Billion
· [11] Monday Morning Links
· [9] 15 States Have Now Gotten Broadband Mapping Money
· [5] AT&T Launching New 7.2 Mbps 3G Modem
Most people now reading
· Windows 7 boot manager editing questions [Microsoft Help]
· Know when to run! [Home Repair & Improvement]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· MI424WR-GEN2 Rev E Configuration Thread [Verizon Fiber Optics]
· Framed for child porn 151; by a PC virus [Security]
· [WIN7] Which Services in Win 7 Have You Turned Off? [Microsoft Help]
· My cat is reluctant to exercise. [General Questions]
· Google Has Acquired Gizmo5 [VOIP Tech Chat]
· How in the world am I going to get into college? [General Questions]
· [ PVP] 3.2 DK PvP D/W Spec... [World of Warcraft]