Re: [PAP2] Unlocking Guide

Author	All Replies
rizzo2dial Premium join:2004-08-05	reply to hardly Re: [PAP2] Unlocking Guide The PAP2 and PAP2-NA use identical firmware. The PAP2 has different NVRAM values burned into the device than the PAP2-NA which is why a Master Reset reverts the device back to a locked Vonage adapter. I tried numerous combinations of trying to reset the adapter (both while in "Sipura" mode and "Linksys" mode, switching back 'n forth between the firmware flavors). It "Sipura" mode, a master reset acted like all "default Sipura" settings were loaded; however, once switching back to "Linksys" firmware, it was a locked PAP2 Vonage adapter again. Rizzo
rizzo2dial Premium join:2004-08-05	to forum · permalink · · 2005-09-27 20:54:11 · (locked)
hardly join:2004-02-10 USA	Is there a modified Sipura firmware available that will load using the PAP2 web interface from a file located on a local machine? Would that effectively turn this device into a SPA2000 (or SPA2002), then only needing to update firmware as if it were a Sipura and not dealing with it reverting to a locked Vonage device? PM me if you need to. Thanks said by rizzo2dial : The PAP2 and PAP2-NA use identical firmware. The PAP2 has different NVRAM values burned into the device than the PAP2-NA which is why a Master Reset reverts the device back to a locked Vonage adapter. I tried numerous combinations of trying to reset the adapter (both while in "Sipura" mode and "Linksys" mode, switching back 'n forth between the firmware flavors). It "Sipura" mode, a master reset acted like all "default Sipura" settings were loaded; however, once switching back to "Linksys" firmware, it was a locked PAP2 Vonage adapter again. Rizzo
hardly join:2004-02-10 USA	to forum · permalink · · 2005-09-27 23:18:57 · (locked)


Sunday, 06-Dec 13:36:11	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF