chaicka
join:2000-04-26
SGP
| SpeedStreamStats v2.0.7
Hi Guys,
For those who have been pondering on the SpeedStreamStats utility, there's good news. A new version, v2.0.7 is available which appears to have additions buttons (additional functionalities too?).
Grab it @ »80.127.153.164/SpeedStreamStats207.zip
Furthermore, when I tried the teledat330stats utility, it didn't report correctly though it was able to detect my CPE. But with this speedstreamstats v2.0.7, even with my totally customized CPE configuration, it can detect its presence, as well as all the stats.
Please refer to the screenshots...
»img59.imageshack.us/img59/7120/s···78ns.png
»img59.imageshack.us/img59/6236/t···s3hz.png |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| Remember to upload your images here by using "got attachments" since that keeps the text and images together. Off site image servers are known to go away from time to time making broken links in older posts. 
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to chaicka
This utility is like the other one as it also shows SBCStats.exe as the original Filename. 
»Speedstream Stats Tool
Regards,
Doctor Olds |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
|  reply to chaicka
My 5100 Router results.
Regards,
Doctor Olds |
|
chaicka
join:2000-04-26
SGP
| reply to chaicka
The Teledat one dun work for me as I am not using the CPE's default lan ip address, and I have heavily customized the configuration, thus the Teledat one cannot properly 'read' the CPE stats.
However, this v2.0.7 works fine even without changing anything on my CPE. |
|
PSMurray
join:2004-10-17
Cato, NY | reply to chaicka
Is there a "Help Manual" available?
Meaning of SNRR, SNRC, Button ="Get DSL Bins" , etc.
How does it get the Train Rates?
Phil |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
1 edit | said by PSMurray  :Is there a "Help Manual" available? No, just the EXE file.
said by PSMurray :Meaning of SNRR, SNRC, Button ="Get DSL Bins" , etc. Signal to Noise Ratio.
SNR (R - Remote) SNR (C - Central Office)
Bins = Binary bits per DSL tone. G.DMT DSL is Discrete Multi Tone that uses up to the allotted 256 tones to carry the ADSL signals. Not supported in all Firmwares and may report zeros (all 0s)
The first 32 bins (aka tones) are for download out of a total of 256 bins (aka tones) that are potentially usable.
said by PSMurray :How does it get the Train Rates? It uses SNMP and FTP.
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
Xenomorph
join:2000-06-10
Fenton, MO
 ·Charter Pipeline
| reply to chaicka
said by chaicka :Hi Guys, For those who have been pondering on the SpeedStreamStats utility, there's good news. A new version, v2.0.7 is available which appears to have additions buttons (additional functionalities too?). Grab it @ » 80.127.153.164/SpeedStreamStats207.zip so... how do you configure it??
i can access my 5100b via 192.168.0.1 (its default). but the application just sits, saying "Searching for device..."
--
»xenomorph.net/ |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| Doesn't work on SBC products 5100b or 4100 according to this thread titled " »New Modem Tool " as the SNMP server is disabled by Efficient at SBC's request during the setup of the custom firmware.
Regards,
Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
tiger9
join:2005-08-01
Ont,Canada | For some reason, it also does not work with 4100's running 004-D240-A2X firmware |
|
PSMurray
join:2004-10-17
Cato, NY | reply to Doctor Olds
What are accepable Signal-to-Noise Ratio?
SNRR: 20.50000; SNRC: 0.000
Button="Get DSL Bins"
All I get is Zeros on the top of the tone numbers.
Phil |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| said by PSMurray :What are accepable Signal-to-Noise Ratio? »AT&T Southeast Forum FAQ »How do I check modem stats & event logs? What do the numbers mean?
quote:
Below are some of the common terms and measurements used to judge line quality. Remember these are not hard numbers but simply a generalization of line statistics:
SN Margin (AKA Signal to Noise Margin or Signal to Noise Ratio)
Relative strength of the DSL signal to Noise ratio. 6dB is the lowest dB manufactures specify for modem to be able to synch. In some instances interleaving can help raise the noise margin to an acceptable level. The higher the number the better for this measurement.
 6dB or below is bad and will experience no synch or intermittent synch problems
7dB-10dB is fair but does not leave much room for variances in conditions
11dB-20dB is good with no synch problems
20dB-28dB is excellent
29dB or above is outstanding
Line Attenuation
Measure of how much the signal has degraded between the DSLAM and the modem. Maximum signal loss recommendation is usually about 60dB. The lower the dB the better for this measurement.
20dB and below is outstanding
20dB-30dB is excellent
30dB-40dB is very good
40dB-50dB is good
50dB-60dB is poor and may experience connectivity issues
60dB or above is bad and will experience connectivity issues
More here:
»DSL FAQ
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
buggage
Premium
join:2002-11-28 | reply to Doctor Olds
Doesn't work with the 5200 E242 either. |
|
tiger9
join:2005-08-01
Ont,Canada | Must be the different chipsets, T/I AR5 & AR7
AR5 : E141 (5100), E240 (5200)
AR7 : D240 (4100/4200), E242(5200) |
|
