Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » US Telco Support » Qwest » Qwest DSL Modem
Uniqs:
7801
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
7M/896K connects at 1meg »
« DNS problem I think  
reduxtion

join:2005-10-09
Hibbing, MN

Qwest DSL Modem

Hi.

The ActionTech modem I got from Qwest just plain sucks. I'm looking for a DSL modem compatible with Qwest. Anyone have any recommendations?

I've had Qwest for only a few days now. I've just switched from Cable.

The DSL modem must have wireless capability, and hopefully have some kind of repeater component I can buy with it, or add on later. Thanks.

metrodust
Hey Thats Mine

join:1999-12-10
Seattle, WA

Re: Qwest DSL Modem

Cisco 678.. old but good

christcorp
Premium
join:2001-05-21
Cheyenne, WY
·Bresnan Online
·VOIPo

Please elaborate on the work "Sucks". While I find the actiontec's wireless capability lacking. Especially in range and stability, I think as a modem, with the most recent firmware, it is very stable and does a good job.

I use a Linksys wrt54gs wireless/4 port router after the actiontec. This takes care of my 4 wired computers and my 2 wireless. The wireless in the linksys is much better.

As recommended, you could go with a cisco 678. Some people loose quite a bit of upload bandwidth using the cisco. It's a hit or miss situation. There are quite a list of other modems available that work on qwest. I believe this forum has a listing of all of them. Basically though, those who aren't hard core cisco and nothing else will work, find the actiontec gt701 quite acceptable.

Let us know what about the gt701 you think sucks and maybe we can see if it's just a setting or two that can be changed. Don't mention wireless issues because we all agree that wireless sucks on it and anyone really interested in wireless and home networks usually add a wireless router, e.g. linksys, Netgear, D-Link to their setup. Later... Mike....
tncarey

join:2005-10-27
Portland, OR

Re: Qwest DSL Modem

I'm trying to set up remote desktop with the qwest actiontec modem and linksys wrt54g router but I can't seem to get it to work; I can remote from my laptop to desktop when I am within my home network, but can't remote in when I am away from home using my computer at work; all computers use XP Pro

RevMortis
I Hear Dead Silicon
Premium
join:2005-05-10
Saint Paul, MN
·Qwest.net

I have yet to find a modem currently available on the market that is truely incompatible with Qwest service. Granted, Qwest only officially supports a select few modems.
*
The trick is to make sure that you can update the VPI and VCI settings. If I remember correctly, it's 32 and 0 for Qwest.
*
Has anyone actually found one that is incompatible?
*
-Mortis

AthlGrond
Premium,MVM
join:2002-04-25
Aurora, CO
·Comcast

Re: Qwest DSL Modem

said by RevMortis See Profile :

I have yet to find a modem currently available on the market that is truely incompatible with Qwest service. Granted, Qwest only officially supports a select few modems.
*
The trick is to make sure that you can update the VPI and VCI settings. If I remember correctly, it's 32 and 0 for Qwest.
*
Has anyone actually found one that is incompatible?
*
-Mortis
Good point on the VPI and VCI settings!

All CAP only modems are incompatible with new accounts at Qwest. The Cisco 675 (for example).

So the modem must support DMT.

Anyone else care to add some other known requirements...?
--
You are now free to paint your hair wild colors and run around naked. -dg2
reduxtion

join:2005-10-09
Hibbing, MN

Re: Qwest DSL Modem

Sucks, meaning not what I was used to before when I used Cable. You've already mentioned short wireless range. I also wanted a web interface that was more straight forward. All the threads I had to read through to get port forwarding to work is testament to bad design on Actiontec's part. I know I'm not going to be going in it when I have it all set up, but right now, I know I don't have it all set up. What took me minutes to port-forward, QoS, MAC filtering, etc on my wireless router, I still don't understand on Actiontec's modem. I still have no idea how to block the internet from the web interface and telnet. Even with the supposed "firewall" on, it wasn't blocked. I'm sure that has already been answered on this board, but I have yet to find it. I don't disagree when you say as a modem, it works great. I'm sure it does it's job well (it's what I am currently using), but it doesn't suit what I am looking for ... wireless with an optional repeater addon capability, 4 port switch, an easy and simple interface.

Anyway, the discussion seems to be going well. I'd like to hear what everybody else says. Thanks to all that replied.
NormanS
Premium,MVM
join:2001-02-14
San Jose, CA
·Pacific Bell - SBC

said by AthlGrond See Profile :

Good point on the VPI and VCI settings!

All CAP only modems are incompatible with new accounts at Qwest. The Cisco 675 (for example).

So the modem must support DMT.

Anyone else care to add some other known requirements...?
So. On the off-chance that I have can make the move into Qwest territory, I can use my SpeedStream 4100?

G.dmt modulation
VPI/VCI can be changed to 0/32 (currently 0/35)
Protocol can be changed to PPPoA (currently PPPoE)

Just curious.
--
Norman
~Oh Lord, why have you come
~To Konnyu, with the Lion and the Drum

adsldude
always learning
Premium,Ex-Mod 2003-9
join:2000-11-10
Colorado


1 edit

Re: Qwest DSL Modem

said by NormanS See Profile :

So. On the off-chance that I have can make the move into Qwest territory, I can use my SpeedStream 4100?
Yes if your 4100 has the PPPoA compliant firmware.

»subscriber.communications.siemen···00.shtml

I use or have used many of the Cabletron/Efficient Networks/Siemens devices with Qwest service. I'm currently using the 5930.
--
My other passion is mountain biking. Info on the Colorado based Front Range Mountain Bike Patrol - FRMBP can be found at:
»www.frmbp.org
dynodb
Premium,VIP
join:2004-04-21
Minneapolis, MN

said by RevMortis See Profile :

The trick is to make sure that you can update the VPI and VCI settings. If I remember correctly, it's 32 and 0 for Qwest.
Close. It's VPI 0, VCI 32, with a few exceptions for certain ISPs- for AOL (eww) customers it's 0.35; can't remember if Earthlink is the same or not. Probably 99% of Qwest ADSL customers are going to be set at 0.32 though.
dkrenik

join:2003-02-03
Louisville, CO
As I'm a new Qwest DSL customer, can I add my Linksys wireless router to the Actiontec modem supplied by Qwest?

Where may I find info on the supported modems for Qwest DSL?

Many thanks
IceWindius

join:2004-03-11
Montana

Re: Qwest DSL Modem

Yes, many people do this as I have with my past Linksys and my current D-Link 4300 by doing DMZing

»US West/Qwest DSL »How Do I Put A Router In My 701g's DMZ?

bbier
Retired G.I., Member T.V.R.W.C.
Premium
join:2000-11-25
Centralia, WA

Re: Qwest DSL Modem

Ahhh...so that is how you do it. I was ripping hair over this trying to make it work....thanks

AthlGrond
Premium,MVM
join:2002-04-25
Aurora, CO
·Comcast

said by dkrenik See Profile :

Where may I find info on the supported modems for Qwest DSL?
The supported modems are:
Actiontec® GT701-wg
Actiontec® 1520 and 1524
Intel® PRO/DSL 3200
Intel® PRO/DSL 2200
Cisco® 675/678
Arescom® NetDSL 800
Accton® DSL 1000

Of these I think they are primarily only distributing the Actiontec® GT701.

If you would like to see a list of all of the modems that people have gotten to work with Qwest DSL you can find that here: »US West/Qwest DSL »What end-user devices work with Qwest ADSL?
--
You are now free to paint your hair wild colors and run around naked. -dg2

jaybe69

@qwest.net

Any suggestions on this issue? I've set up my dsl modem (by Actiontech), with Qwest service, but my Internet access only works with the ethernet cable connected to the powerbook. It is a wireless modem, but I cannot get the laptop to recognize the signal. Is it a setup step I missed? I have used my laptop in other places with a wireless signal broadcast, and it automatically recognizes it. Otherwise, service has been great. Just hoping to be able to roam around while connected, without having to plug in. Thanks,

jaybe

Suffering
Retrovertigo
Premium,VIP
join:2004-03-06
127.0.0.1
clubs:

Re: Qwest DSL Modem

jaybe69: try putting a $ symbol in front of your wep key. Most things apple does VERY well... for some reason they feel the need to be novel when it comes to wireless.
--
Beer is proof that God loves us and wants us to be happy -Benjamin Franklin

jaybe69

@ch2m.com

Re: Qwest DSL Modem

Vinyl rocks, beer rolls, and you are a rock star. I will try it! Thanks,

jb

Mohan108

@iauq.com
I have a brand new unused modem received from Qwest. If you want to buy write me on mohand1@epatra.com

Thanks
Mohan.
ADent

join:2002-12-05
Denver, CO
MicroCenter sells the Zoom X5 for $79.
reduxtion

join:2005-10-09
Hibbing, MN

I have purchased a Netgear DG834G to replace my Actiontec modem. It works great ... when it works. The connecion constantly gets disconnected, and thus I get disconnected via the wireless and the DSL connection itself. What is happening? Is there something I need to do to stop this?
wingman99

join:2003-12-18
Bettendorf, IA
·Qwest.net


3 edits

Re: Qwest DSL Modem

Have you updated to the newest firmware

»kbserver.netgear.com/products/dg834gv1.asp

After that then check the sync events recorded in the
Network Management Information.

Post all the stats
reduxtion

join:2005-10-09
Hibbing, MN

Re: Qwest DSL Modem

Yes I have and now it works great. It was pretty hard to get since it was barely online to surf web pages.
WannaBB

join:2005-07-21
Olympia, WA

Welcome to the club! I have the NetGear DG834 with the latest firmware and it is rock-solid. It typically stays connected for one month at a time.

Of course, it isn't "supported" by Qwest. So you need to keep an Actiontec or Cisco around just for those rare occasions when you need to convince Qwest that "they" have a problem.
JLe2k

join:2003-08-10
Portland, OR
would a msn 1000 flashed modem to a smc 7401bra work? its very customizable it seems X)
hardly

join:2004-02-10
USA

Re: Qwest DSL Modem

I have three smc 7401bra on Qwest.
Uptime is measured in years.
Forums » US Telco Support » Qwest7M/896K connects at 1meg »
« DNS problem I think  


Friday, 04-Dec 09:32:02 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [163] Comcast Releasing Promised Usage Meter
· [142] Avast Antivirus Has Gone Mad
· [107] Comcast Makes NBC Universal Acquisition Official
· [104] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [90] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [81] Latest Consumer Reports Survey Not Kind To AT&T
· [71] Sprint Defuses GPS Privacy Media Bomb
· [70] Baltimore To Ban Lazy Cable Installs
· [68] FCC Ponders Moving From PSTN To IP Voice
· [64] Broadband Killed The Game Console
Most people now reading
· False positive in Avast! or is it real? [Security]
· Usenet Services- Clarification [TekSavvy]
· [Rant] Disrespect of PTO [Rants, Raves, and Praise]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· Windows 7 boot manager editing questions [Microsoft Help]
· Extjs grid combo box. [Webmasters and Developers]
· Linux is terrorist - according to MS... [All Things Unix]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· [DNS] Google's public DNS... performance increases? [Comcast HSI]