3SGTE
ST215W
Premium,MVM
join:2000-11-23
there
clubs:
| DMA is not working
I have an Asus A8V Deluxe,
Running Bios 1013beta
I have a recently purchased Hitachi 400 gig Pata hard drive.
It will only run in PIO mode.
A different hard drive on the same controller previously ran using DMA, no problems.
I checked in Windows, Use DMA if available is checked.
Current state is PIO mode.
I checked in the Bios, DMA is enabled.
I used the Hitachi DFT, No problems with either the slow or fast test.
I used the Hitachi drive settings tool, to check that DMA is enabled on the drive itself.
Is there anything else I am missing?
--
The preceeding post may contain dry humor. |
|
dosdoxies
join:2004-12-15
Wallingford, PA | Are you using the 80 conducter cable? |
|
3SGTE
ST215W
Premium,MVM
join:2000-11-23
there
clubs: | Yes. I am using the same cable that worked no problem with the old drive.
I appreciate the thought!
--
The preceeding post may contain dry humor. |
|
MrClean132
Sassy 'Medic
Premium
join:2000-08-28
Toronto, On
| reply to 3SGTE
I had the same problem with an old western digital 60 gig.
It would not run in DMA mode only in PIO. BUT when I put it in a different computer it did run in DMA.
I have no clue. On that comp, tried formatting, removing IDE drivers, nothing. Always ran in PIO no matter what. |
|
mechwarrior
join:2004-03-21
East Palestine, OH | reply to 3SGTE
what you can try is setting the PIO mode in the bios to 0 in stead of auto and see if that will help. |
|
andyb
Premium
join:2003-05-29
SW Ontario | reply to 3SGTE
i had this problem before.easy fix was to uninstall the IDE Channel for the affected drive in device manager then reboot.windows will reinstall it. |
|
MrClean132
Sassy 'Medic
Premium
join:2000-08-28
Toronto, On | reply to 3SGTE
It's an easy fix as if it works.
I still have that computer with the same problem and I have never found a way to fix it.
Other drives will run DMA on it, just that one on that computer. It's maddening |
|
JollyStomper
The Funky Feel One
Premium
join:2003-03-16
Right 'Dere
edit:
October 23rd, @08:58PM
| reply to 3SGTE
Latest chipset/IDE drivers? |
|
3SGTE
ST215W
Premium,MVM
join:2000-11-23
there
clubs:
| said by JollyStomper  :Latest chipset/IDE drivers? I will check those items recently suggested, I won't have a chance for a few days.
I will report back when I have the results.
--
The preceeding post may contain dry humor. |
|
3SGTE
ST215W
Premium,MVM
join:2000-11-23
there
clubs:
| reply to 3SGTE
Reporting back...
I tried deleting and re-detecting the IDE controller, it worked in multi-word 2 DMA for a while after that. Still slow...
I updated my VIA chipset drivers, rebooted, still slow.
Did nothing for about 5days, suddenly it works great (compared to before), about 45 MB/s. The drive is about 50% full, so I can tolerate that...
If it stays this way, I will be happy. I just don't know if I really trust the drive though...
--
The preceeding post may contain dry humor. |
|
Rawhide
Blue Balls
join:2002-02-18
The Moon
| Once a hard drive gets stuck into the PIO mode or turned down windows will not turn it back up. So deleting the controller or editing the registry would do the trick. Each hardware setup the place in the registry is different, but once you find it not hard to remember. You could just search for masteriddatachecksum entry and delete it then restart the computer.
--
Look for bad caps!!! 2.5/384 only $19.99 6/512 5 Ip's $79.99 |
|
