Reviews:
 ·ViaTalk
| reply to helloagain
Re: [Other] HKBN 2b PAP2 config If you can't find the "Symmetric RTP" option then it might be that the firmware doesn't have it. On SPA-3000, the option is there but it looks like SPA-1001 and SPA-2002 (PAP2 equivalents) don't have it.
For those of you still having incoming audio problems, would you please try "Line 1 > SIP Settings > Restrict Source IP" = "yes". Some of the syslog files sent to me have private IP addresses for the "Contact:" header. Additionally, the SDP also had private IP addresses instead of the public IP address.
Would someone with incoming call problems be willing to PM me an HTML dump of their PAP2's configuration? I would like to compare the parameters between a PAP2 and the SPA-3000.
Additionally, for those of you with PAP2's and the audio problem, was the PAP2 an unlocked Vonage unit or a virgin PAP2-NA?
See ya...
d.c. |
|
2 edits | I have problem connecting to 2b with Sipura SPA2002.
I can't register with the server.
The registration state is always "Not Registered".
I can get a dial tone if I change the LINE1>Proxy and Registration>Make Call Without Reg to "NO".
For proxy, I use s2hkbntel.net.
For OB proxy, I use s21.hkbntel.net.
I did reset the SIP from the web, pa.2b.com.hk.
Same behavior...
Any one can help please?
Thanks.
......
..... |
|
Reviews:
·ViaTalk
| If you are behind a NATing firewall/router, then you might need to turn on STUN or setup portforwarding.
Look at »www.voip-info.org/wiki/view/Sipu···+HKBN+2b for an example of the SPA's configuration.
See ya...
d.c. |
|
1 edit | Hello im_chandave,
Thanks for the reply.
I am behind a NATing firewall/router, and I did
turn on STUN. Not sure about portforwarding.
Do you mean the port forwarding on the router?
Or the SPA2002?
By the way, I can use the softphone without problem.
Not even modifying any setting on my router.
Thanks. |
|
|
|
Reviews:
·ViaTalk
| said by Snoopy1010:I am behind a NATing firewall/router, and I did turn on STUN. Not sure about portforwarding. You should do one or the other.
said by Snoopy1010:Do you mean the port forwarding on the router? Or the SPA2002? Portforwarding would always be done on the Firewall/router.
said by Snoopy1010:By the way, I can use the softphone without problem. Not even modifying any setting on my router. The softphone provided by HKBN's "2b" service takes care of the NAT transversal.
said by Snoopy1010:I can get a dial tone if I change the LINE1>Proxy and Registration>Make Call Without Reg to "NO". You get a dialtone because setting that parameter to "no" means to give you a dialtone regardless if you successfully register.
Make sure you don't have the softphone still running in the background of your computer. Check your taskbar. If you are sure the softphone is not running then reset your "2b" account and power-cycle your SPA.
See ya...
d.c. |
|
| Hi im_chandave,
I did turn on STUN so do I still need to configure
the router to do port-forwarding?
You said "You should do one or the other".
So I guess it is not necessary to configure the router.
Is it correct?
I did turn off the softphone while experimenting the
SPA. I then reset my "2b" account and power-cycle my SPA.
I saw a lot of traffic between my SPA and the modem even
I can't register. I guess if I can register, I should be
able to use the phone, right?
Any other suggestion please?
Thanks in advance....
 |
|
