|
 VoipNewbie1
join:2005-11-02
Waipahu, HI
| Re: [Other] Cisco 7960 "protocol application inval DTwilliams,
This sounds like the problem. I just installed a router for the first time. The router is a Draytek 2900vg, with wireless lan, DHCP server, firewall and a bunch of other stuff that I'm not sure what it does. Anyways, this is the first time I set up a router and I didn't do any kind of setup to the DHCP server. I figured it would set up automatically.
So according to your last post, I need to input 150 into the DHCP server on the VLAN.
Can you tell me where would I input that information? | |
|
 | VoipNewbie1
join:2005-11-02
Waipahu, HI | Re: [Other] Cisco 7960 "protocol application inval I should also mention that I set up my router to work on DHCP, not a static IP. Will this work with Cisco 7960 IP Phones? | |
|
| | VoipNewbie1
join:2005-11-02
Waipahu, HI | Re: [Other] Cisco 7960 "protocol application inval Does anyone know of a way to reset the phone back to factory conditions without using TFTP? | |
|
| | | 
DaSneaky1D
one wall to block them all
Premium,MVM
join:2001-03-29
The Lou
 ·Charter Pipeline
| Re: [Other] Cisco 7960 "protocol application inval Why are you trying to avoid using TFTP?
Don't confuse a factory reset with fixing a bad image update. You have a bad image update. You will need a TFTP server to correct that.
--
:: my trivial ramblings :: | |
|
|
|
|
·