Example of using a second router to access the 327W status page
For this example all subnet Masks are 255.255.255.0.
The LAN port of both routers must be in a different subnet than the327W. I used 192.168.7 for this example (and the default 192.168.1 for the 327W).
The 327W is in bridge.
The WAN IP address of the second router must be set to the same subnet as the 327W (192.168.1.2 gateway 192.168.1.1 in this example.
The WAN ports of both routers are connected to LAN ports on the 327W.
A LAN port of router 1 is connected to a LAN port of router 2.
At any PC the needs to access the 327W in a CMD window enter
ROUTE ADD -p 192.168.1.0 MASK 255.255.255.0 192.168.7.2
This tells windows to use router 2 at 192.168.7.2 as the gateway for 192.168.1
In a browser open the IP address of the 327W (192.168.1.1 in this example).--