jbaird2
join:2005-11-15
Danville, KY
1 edit | reply to n3mon1c
Re: [Xtreme] Bellsouth Xtreme Ping Issues.
Ok.. I have been switched to Interleaved as well. I am using 3.0 Xtreme. Here are some of my stats:
Line State Up
Modulation G.DMT-Mode
Data Path Interleaved
Down Stream Path Up Stream Path
NN Margin (db) 13.5 not defined
Line Attenuation (db) 45.0 not defined
CRC Errors 3 6
OK.. i see that 45 is sort of high.. Could this be caused by the 25ft phone cord running from the jack to the modem? I haven't had any sync issues, but maybe this is why I have been put on interleaved. |
|
n3mon1c
join:2005-11-14
Laurel, MS
| Thanks for all the help guys! Guess it's time for me to switch over to cable though, I'm tired of having to do all this stuff just to get a stable internet.. My friends right next to me have cable and theirs is perfect, so I'm gonna try that I think.
Thanks again. |
|
brandon
Some truth included in this post.
Premium
join:2003-03-31
Hurley, MS | Good luck with cable. |
|
brandon
Some truth included in this post.
Premium
join:2003-03-31
Hurley, MS
 ·AT&T Southeast
| reply to jbaird2
jbaird, you should probably start your own thread to begin your troubleshooting process.
That said, your stats, while not beautiful, are certainly well within spec. That's not to say that they were not out of spec when you were on fastpath, however. You could call and have your line put back on fastpath and you might be ok, but if ping time is not terribly important to you, you should have a pretty stable connection as it stands right now. |
|
