rizzo2dial
Premium
join:2004-08-05
3 edits | reply to david_gruenb
Re: [PAP2] New useful utility for UNLOCKED PAP2's
I'd be curious to know where you saw something about editing the ENCRYPTED FILE to attempt re-decrypting. That sounds like a disaster waiting to happen.
At any rate, if you're using the MAC ADDRESS located within your PAP2's Info Page (i.e. the web page which appears when you go into your PAP2's web interface), and if you haven't populated a TFTP Directory (i.e. GPP_D) value, then you may have mis-typed the GPP_K key (or didn't COPY/PASTE it in its entirety).
To make sure you grab the GPP_K passphrase IN FULL, do it as follows:
1) Within your PAP2's web-interface, click the mouse inside the GPP K input box so that you have a flashing cursor inside that box
2) On your keyboard, Press and release the Home key (to bring the cursor to the beginning of the box)
3) Press and hold the Shift key
4) Press and release the End key
5) This will SELECT the entire GPP K value. (You can now let go of the SHIFT KEY)
6) Hit CTRL+C (i.e. hold down CTRL then press and release 'C') to COPY the selected value to the Windows Clipboard.
7) Go into the VuckFonage GPP_K passphrase box (so that there's a flashing cursor in that box) and hit CTRL+V (i.e. hold down CTRL then press and release 'V'). This will PASTE the copied value.
Try re-decrypting again. If it doesn't work, IM me w/ your e-mail address so we can discuss this a bit more w/ the ability to send file attachments to one another.
Rizzo |
|
Umbyboy
join:2006-09-25
84100 | I get this message: unable to resolve host when I'm using vuckvonage. Anyway know how to force a sipura 1001 firmware into my unlocked pap2? |
|
rizzo2dial
Premium
join:2004-08-05
| 1) What host are you using?
2) Have you tested the command line TFTP utility using the same host?
Try:
quote:
tftp -i host get file
where:
•host is the host name you're trying to connect to
•file is the name of the remote file to grab (i.e. spa[MAC].xml)
|
|
Umbyboy
join:2006-09-25
84100 | I tried to ping ls.tftp.vonage.net and it's working. where should I put tftp -i ls.tftp.vonage.net get spa[MAC].xml ?
I also opened port upd but I still get this message:
unable to resolve host ls.tftp.vonage.net |
|
rizzo2dial
Premium
join:2004-08-05
| said by rizzo2dial  :2) Have you tested the command line TFTP utility using the same host? said by Umbyboy :where should I put tftp -i ls.tftp.vonage.net get spa[MAC].xml ? In my original suggestion, the statement "command line TFTP utility" means that you need to type this in a COMMAND PROMPT window.
said by Umbyboy :I also opened port upd but I still get this message: unable to resolve host ls.tftp.vonage.net Is "port udp" another application, or did you mean you opened the specific UDP port in your firewall? |
|
Umbyboy
join:2006-09-25
84100 | Putting the command line I found an xml file in c: is it useful to let VuckVonage work?Yè I opened a specific UDP port but it's still not working! |
|
rizzo2dial
Premium
join:2004-08-05
| said by Umbyboy :I opened a specific UDP port but it's still not working! I take it that means you've opened the specific UDP port (for TFTP purposes) in your firewall. If all other internet connectivity has been blocked to the program, that means DNS resolution has been block as well. According to searches on Google, DNS uses UDP port 53 (although some posts claim it can use TCP port 53 as well). Open up that port too and try again. |
|
Umbyboy
join:2006-09-25
84100 | I opened both ports but when I try to Download&Decrypt I still get this message: "unable to resolve host ls.tftp.vonage.net".I disabled all firwalls |
|
rizzo2dial
Premium
join:2004-08-05
1 edit | If you're certain ALL FIREWALLS have been disabled, I guess try the following:
1) Uninstall the program
2) Uninstall the .NET Framework 1.1
3) Re-install the .NET Framework 1.1
4) Re-install the program.
If you have access to another computer, try installing it on there to see if it works ok as you're the only person who's reported this issue. |
|
Umbyboy
join:2006-09-25
84100 | Tnx for the answer:)I'll try and let u know! |
|
platty99
@rogers.com
| I was gettiing the "unable to resolve.." error too.
I realized I had added info to my windows "hosts" file which was forwarding all requests for ls.tftp.vonage.net to my local server.
Once I deleted those new entries, Vuckfonage was able to download and decrypt the file without any problems.
The windows "hosts" file is located in C:\WINDOWS\SYSTEM32\DRIVERS\etc\hosts
Hope this helps someone. |
|
rizzo2dial
Premium
join:2004-08-05 | That's good information. In Umbyboy's case, the command line TFTP and ping utilities resolved the ls.tftp... domain name, so the hosts file was not the issue. I still don't know if the issue was resolved for Umbyboy. |
|
