Re: ubuntu and belkin f5D6020v3 card

Author	All Replies
blound join:2005-02-06 Spain	reply to jdong Re: ubuntu and belkin f5D6020v3 card brian@thefergies:~/Downloads/rtl8180-0.21$ sudo ./module_load brian@thefergies:~/Downloads/rtl8180-0.21$ cd brian@thefergies:~$ sudo iwconfig wlan0 essid easynote brian@thefergies:~$ sudo iwconfig wlan0 ap 00:01:36:09:A2:70 brian@thefergies:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0 IEEE 802.11b ESSID:"easynote" Mode:Managed Frequency:2.472 GHz Access Point: 00:00:00:00:00:00 Bit Rate=11 Mb/s Retry:on Fragment thr:off Link Quality=31/100 Signal level=-114 dBm Noise level=-187 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
blound join:2005-02-06 Spain	to forum · permalink · 2005-11-27 18:20:32 ·
salahx join:2001-12-03 Saint Louis, MO	One thing to keep to mind if the rtl8180 drivers on the main download page are unmaintained - in particular, if you are using Linux 2.6.12 or above, you will need to download and compile the sources from CVS. If you do, you also to grab the 80211 source from the same CVS too (or, from the main project.
salahx join:2001-12-03 Saint Louis, MO	to forum · permalink · 2005-11-27 20:25:07 ·

OS and Software > All Things Unix > ubuntu and belkin f5D6020v3 card