smaye
join:2005-12-11
Hendersonville, TN | reply to Irish Shark
Re: [Cable] Is there a Broadband for Dummies? Need
So, it is primarily a server issue on which I can not have an effect.
Thanks for the info! |
|
Irish Shark
Play Like A Champion Today
Premium,MVM
join:2000-07-29
Las Vegas, NV | reply to smaye
Read this ... »Tweaking FAQ »1 or 2+ second stall detected.
--
"You can observe a lot by watching". Yogi Berra |
|
smaye
join:2005-12-11
Hendersonville, TN
| reply to Lanik
said by Lanik  :said by smaye :What causes it? A short delay in sending data. Is there anything I can do about it on my end? |
|
Lanik
Lab-nik
Premium,ExMod 2002-03
join:2001-06-25
Bay Area
| reply to smaye
said by smaye :What causes it? A short delay in sending data.
--
Computer Consulting for the Next Generation. |
|
smaye
join:2005-12-11
Hendersonville, TN
| reply to Lanik
said by Lanik :As for the 1 second stall I wouldn't worry about it, traffic is most likely cause of it. I would not worry about it, but I guess I read the instructions and said, "if the stall persists...." I have never done a tweak test that I didn't get this stall.
What causes it? |
|
Lanik
Lab-nik
Premium,ExMod 2002-03
join:2001-06-25
Bay Area
| reply to smaye
The VOIP adapter is most likely eating up bandwidth communicating with the companies servers. As for the 1 second stall I wouldn't worry about it, traffic is most likely cause of it.
--
Computer Consulting for the Next Generation. |
|
smaye
join:2005-12-11
Hendersonville, TN
| reply to Lanik
Hi ,
I appreciate the reply. I tested with and without the Sunrocket VOIP adapter in place.
Speakeasy Seattle WA- w/o Sunrocket Adapter
2005-12-21 04:17:06 EST: 5389 / 354
Your download speed : 5389 kbps or 673.7 KB/sec.
Your upload speed : 354 kbps or 44.3 KB/sec.
Speakeasy Atlanta GA (Closest to Nashville)- w/o SR adapter
6183 UP/ 361 DN
Speakeasy Seattle WA- with Sunrocket Adapter
5057 UP/356 DN
Speakeasy Atlanta GA (Closest to Nashville)- with SR adapter
6184 UP/ 361 DN
The VOIP adapter seems to have an affect on performance. More so the further away the test. Why?
Also, my test results are better in general today as opposed to last night. Any ideas?
With the SR adapter disconnected the MTU warning goes away, however, I still get the 1+ stall. Is there anything I can do for either or both? |
|
