nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
 ·AT&T U-Verse
 ·AT&T Midwest
| reply to Storm97
Re: disabling routing on westell 6100, modem
You should be able to put your router in the closet, and just rely on the 6100.
Alternatively, reconfigure the 6100 as a bridge (unrouted bridge). If your service uses PPPoE, then you will need to set your router to handle the PPPoE.
If your service uses DHCP, then you might need to find the 6100 mac address, and clone that in your router. Otherwise you might be unable to acquire a public address until your 6100 lease expires. |
|
Storm97
join:2003-04-14
Evanston, WY
 ·Comcast
| So, to understand this right... The 6100 gets a 71.xxx ip (found it on the setup page of the modem) but it assigns a 192.168 ip to my PC when directly connected. When I hook up the router, it gives the same IP (192.168.1.47) instead of the "Real" 71.xxxx ip to the router.
How would I be able to use just the 6100 and network the PC and XBox together w.o using a router or another piece of equipment?
--
My Computer: Dell Dimension 4500, w/ Pentium 4 @ 2.00Ghz, 40 Gig WDC drive, 512MB RAM, NVIDIA GeForce4 MX 420 and GVC-Realtek 10/100 NIC |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL | You might need an ethernet hub or switch for this. |
|
Storm97
join:2003-04-14
Evanston, WY | So, the router I already have is out of the question then?  |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
·AT&T U-Verse
·AT&T Midwest
| You could still use that.
There is a whole long thread about how to use a router.
»How to use my Linksys wireless router with my 327w
Okay, it's for the 327w. But it mostly should apply to the 6100. |
|
