sckramer
join:2002-07-22
Northfield, OH | reply to dslpartner
Re: x-550 mimo router MTU
In the x550 I set it to 10, 100 and auto
it does not work at all at 100, so it must be 10 |
|
dslpartner
join:2005-02-18 | Could be an issue where the LAN port is 10Mb half duplex only, what happens if you set it to auto?
--
"Perl is executable line noise, Python is executable pseudo-code." |
|
sckramer
join:2002-07-22
Northfield, OH | it acts identically in either auto or 10-mbit
100-mbit it never gets an ip address from the isp |
|
sckramer
join:2002-07-22
Northfield, OH | reply to dslpartner
great idea tho, maybe i should try putting a basic 100 mbit switch between the cable modem and x550 wan port as a test, maybe that will convert it correctly? |
|
sckramer
join:2002-07-22
Northfield, OH | reply to dslpartner
looked up the modem:
its a toshiba pcx2200... the specs list the port as: 10baseT; half-duplex |
|
dslpartner
join:2005-02-18
| Then that seems to be your problem :| If you cant configure the x-550 to be in 10Mbit half duplex support you might have some luck with a hub that can support 10Mbit half duplex and what the x-550 support, inserted between the two devices.
--
"Perl is executable line noise, Python is executable pseudo-code." |
|
sckramer
join:2002-07-22
Northfield, OH | I put a switch between the two and it did fix it...
do you think I should bug zyxel about this, or at least let them know? do any zyxel techs check this board?
I'll prob just hastle rr for a new modem, thanks!! |
|
dslpartner
join:2005-02-18 | Get a new modem  |
|
