r00t 4orce
join:2000-11-06
Albany, NY
| reply to seishino
Re: New Firmware - AG-225H
said by seishino  :It does seem to have the "used USB" ports problem. If ever unplugging it, it would need to be plugged into a different USB port. Keep doing this, and you would go through all of the virgin ones until none were left, and the system would need to be rebooted. Very frustrating. While I have noticed this too - I have been successful with 2 methods of work-arounds.
Yes I know you don't 'have' to "eject" USB items w/XP but if you do eject the device when removing it I have been able to re-use the same port.
OR
Plug-it back in to the same port and start up add new hardware from the CP and you should 'hear' it get found again.
Yes I know neither of these should be necessary but that have both worked for me.
BTW - Got mine 2 days agon and have to say that it is a very cool device.
--r00t
--
Do you know where your nodes are? |
|
seishino
join:2006-01-12
Cambridge, MA
| reply to amigauser10
As an update to this, I had been trying to flash the firmware on the AG-225H via XP for several days now. However, the moment I turned off the configuration utility as suggested in this thread, I was able to re-flash it. That seemed to be the trick.
It does seem to have the "used USB" ports problem. If ever unplugging it, it would need to be plugged into a different USB port. Keep doing this, and you would go through all of the virgin ones until none were left, and the system would need to be rebooted. Very frustrating.
Let's hope it now works with OSX. |
|
