tllennon
join:2006-01-28
Keyport, WA
| reply to nwrickert
Re: Unable to access 327w config via 198.162.1.1
Worked like a champ! It is »24.113.32.60. I get a page called FastFlow Broadband Provisioning Manager by Bigband Networks and am now stymied by the CSR login and password. I tried "admin/password" and "admin/admin" which I have seen in other posts, to no avail. I assume this is proprietarial firmware loaded by the service provider (Verizon)? I no longer have a Verizon account and can't expect tech support from them. Know of anyway to reset to a factory configuration or any other default login/passwords? Thanks again! |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
 ·AT&T U-Verse
 ·AT&T Midwest
| Sorry, wrong number.
24.113.32.60 is probably your ISP's router. It belongs to Wave Broadband - are they your ISP?
Here is my best guess:
You are not using your 327w as a wireless router. You might be using it as a wireless access point. It is acting as a wireless repeater to connect you to your cable modem, but isn't doing any routing.
If you want to get to the configuration page of the 327w, try this:
(1) manually configure your computer IP address to 192.168.1.50
(2) browse to "http://192.168.1.1"
When finished with accessing the modem, configure your computer back to "get an IP address automatically". |
|
tllennon
join:2006-01-28
Keyport, WA
| You rock!!! I did not consider the distinction between repeating and routing. I followed your directions, got to the configuration page, and adjusted the settings in accordance with an earlier post I found at »Re: Using Westell 327w as a wired switch/wireless AP. Thanks to you I now have wireless internet. I assume I will have to use your manual IP trick anytime in the future to access my 327W config page. Is there any other check you recommend I do to confirm that I have configured correctly? |
|
