how-to block ads
|
DSLrgm
Premium,MVM
join:2002-08-22
Oak Park, MI
| Re: Setting passwords on probably any PAP2 firmwar No.
I just started working with PAP2s a couple of weeks ago, and have begun accumulating lots of information about them.
The link you give is good for covering the provisioning aspect once you take control of your PAP2. But not how to get the admin password to start the unlocking.
I would like to find the time and start putting together some good, organized information on the voip-info.org wiki,,,,
We have threads and threads on this stuff but no solid source of info. Organized by initial firmware version and if it was attached, maybe.
How to snoop out the provisioning and set the passwords as I show here.
How to get a clean 3.1.6 firmware, then how to provision it yourself... | |
|  mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA | Re: Setting passwords on probably any PAP2 firmwar This is an excellent work. Be sure to read this post on How to Provision Your Own PAP2. | |
| | DSLrgm
Premium,MVM
join:2002-08-22
Oak Park, MI
| Re: Setting passwords on probably any PAP2 firmwar This was one of the posts that 'taught' me how to set the admin password to something I knew.
There is lots to do. Is tftp the way to go? It IS an efficient protocol for small files (and still used extensively for large firmware files).
Or ftp or http? These are a bit more secure. And AAH has an ftp server already set up for polycom and some other phones. | |
| | | rcilink
Premium
join:2003-12-15
Manchester, NH
| Re: Setting passwords on probably any PAP2 firmwar Similar to the PAP2 admin guide, I use the HTTP approach over TFTP. HTTP is more secure than me opening-up a TFTP server.
I guess the difference is whether you will be provisioning PAP2s on the network (public Internet) or if you will be only working inside your firewall.. If only inside, security is not that critical for your provisioning server.
Anyhow, looking forward to a concise, accurate guide for the PAP2 project. Someone someplace did start a wiki, dedicated to the PAP2. (maybe a google search for PAP2 WIKI UNLOCK would find it? )
--
PAP2 Info: PAP2 Unlock PDF
PAP2 SPATools: PAP2 SPAtools | |
| | | | DSLrgm
Premium,MVM
join:2002-08-22
Oak Park, MI
| Re: Setting passwords on probably any PAP2 firmwar It was pointed out to me that:
I have a syntax error on .
At some firmware release, it seems that a cleartext xml file is ignored by the pap2.
I was told higher than 2.0.10(a). But the one I just did was 2.0.12 - something (maybe I can find my note on what).
I am leaving for RSA conference in a few hours. I suspect there will be someone there to ask.. | |
| | | |
|
