DSLrgm
Premium,MVM
join:2002-08-22
Oak Park, MI
| reply to DSLrgm
Re: Setting passwords on probably any PAP2 firmwar
Version correction.
I finally found my notes. I started at 2.0.9 (LSd).
I see where I got the 2.0.12, it was a copy of some instructions from another post.
Big appology from over here at Detroit Metro Airport on my way west...
Just trying to get too much done too fast. |
|
rizzo2dial
Premium
join:2004-08-05 | Do you have a copy of the 2.0.9(LSd) firmware file? (This specific version of firmware is well known to support PLAIN TEXT XML files).
Rizzo |
|
DSLrgm
Premium,MVM
join:2002-08-22
Oak Park, MI
| said by rizzo2dial  :Do you have a copy of the 2.0.9(LSd) firmware file? (This specific version of firmware is well known to support PLAIN TEXT XML files). How would I have gotten it?
I opened the box my brother-in-law handed me (factory sealed) and the IRV reported 2.0.9 and the web page was 2.0.9 (LSd).
I have yet to read how to upload anything.
If I faked Vonage out the right way, would they download to me the 2.0.9 firmware? If so, give me the magic command and you will get the firmware.
BTW, I have started my documentation. I have downloaded FreeMind and putting everything together there. I once used "The Brain" and this is just like it. It is allowing me to organize everything. |
|
rizzo2dial
Premium
join:2004-08-05
| said by DSLrgm :I opened the box my brother-in-law handed me (factory sealed) and the IRV reported 2.0.9 and the web page was 2.0.9 (LSd). Thanks for clarifying.
said by DSLrgm :If I faked Vonage out the right way, would they download to me the 2.0.9 firmware? If so, give me the magic command and you will get the firmware. Back when I extensively searched for it, I was unable to find any links to the PAP2 2.0.9(LSd) firwmare file. I've even tried URL manipulation @ Vonage's firmware sites w/o success. I'm unaware of any "magic command(s)" enabling exporting of existing PAP2 firmware to a file.
Rizzo |
|
