Maxo
Your tax dollars at work.
Premium,VIP
join:2002-11-04
Tallahassee, FL
clubs:
 ·Embarq
| [XP Pro] Can't update ATI All-In-Wonder 9600
With latest drivers | 
With drivers from the CD. |
--
"Padre, nobody said war was fun now bowl!" - Sherman T Potter
»www.cafepress.com/maxolasersquad
»maxolasersquad.com/
»maxolasersquad.com/network/ My DSL Network Guide
»myspace.com/mlsquad |
|
salterbomb
join:2003-10-18
Conroe, TX | did you install the multimedia center drivers as well?
install the catalyst 6.2's and the multimedia center 9.13 with everything listed and it should work |
|
Nightwing
Premium
join:2002-04-08
CT | reply to Maxo
Do you need Microsoft .net framework installed to run the multimedia center? Or do you just need it to run the Catalyst control center? |
|
Smoove910
Premium
join:2005-08-01
Nampa, ID | reply to Maxo
Use the omega drivers. (Google for "Omega Drivers") |
|
fegul
Premium
join:2004-08-23
united state | reply to Nightwing
For the control center I believe |
|
Maxo
Your tax dollars at work.
Premium,VIP
join:2002-11-04
Tallahassee, FL
clubs:
·Embarq
1 edit | reply to Maxo
Well, the first thing I did was I went to the website and got the most recent drivers from »https://support.ati.com/ics/support/defa···erID=293
And then I downloaded the latest version of of multimedia center. That only enabled the video drivers to work, but not the tv tuner drivers. So then I put in the CD and ran through that and then everything was installed and I could watch TV. I downloaded just the drivers again and installed them, using both the setup.exe and by pointing Device Manager to the extracted folder (I tried both of these ways separately), but each time when I updated just the video drivers to the latest, it removed the tv tuner drivers. I am currently running the old drivers on the latest version of mmc. It all works, and if I can't get the latest video drivers to work that's fine. But if possible, I'd like to have the latest drivers just to make sure everything is running the best as possible.
Nightwing  , I have .NET 2.0 installed because I'm also taking a Visual Basic .NET class. I also tried the .NET download from the website just to make sure.
Smoove910 , I'll look into the Omega Drivers. |
|
sechs
Premium
join:2001-07-19
Left Coast
·AT&T Yahoo
 ·Astound Broadband
 ·AT&T U-Verse
| reply to Maxo
Are you installing the WDM drivers? These are necessary for the VIVO and tuner devices on the card.
ATi has a package with the video and WDM drivers along with the control center. It also has each item separately. If you are using the full package, try the separate drivers; if you are using the separate drivers, check that you are installing both video and WDM.
--
It's not what you know but who you know... |
|
Maxo
Your tax dollars at work.
Premium,VIP
join:2002-11-04
Tallahassee, FL
clubs:
·Embarq
| said by sechs :Are you installing the WDM drivers? These are necessary for the VIVO and tuner devices on the card. ATi has a package with the video and WDM drivers along with the control center. It also has each item separately. If you are using the full package, try the separate drivers; if you are using the separate drivers, check that you are installing both video and WDM. I discovered my problem. I would first install the display drivers, and then the WDM drivers. What I needed to do was install the display drivers, reboot, install the WDM drivers, and then reboot. Now it is all well. Though my channels are no longer displaying without lots of fuzz. I'm working on that.
--
"Padre, nobody said war was fun now bowl!" - Sherman T Potter
»www.cafepress.com/maxolasersquad
»maxolasersquad.com/
»maxolasersquad.com/network/ My DSL Network Guide
»myspace.com/mlsquad |
|
Maxo
Your tax dollars at work.
Premium,VIP
join:2002-11-04
Tallahassee, FL
clubs: | Fixed the fuzz was my VCR turned on. |
|
