moffl
join:2005-02-28
Prince Albert, SK
| losing packets
hey guys any of you that did the tranzeo 2.11 upgrade having any packet loss.
Ever since we did it on the tra5nf non amped and amped i have had problems with dropping packets. even though the ping rate is 1ms 99.9 percent of the time i still get a time out every once in a while and after letting it go this is what i get (this is the last one)
packets sent = 7854, Received = 7813, lost 41 (0% Loss)
Approx. round trip times in milli-seconds:
Minimum = 0ms, Maximum = 27ms, Average =0ms |
|
goldenspacek
join:2005-04-22
Pinckney, MI | none here |
|
superdog
I Need A Drink
Premium,MVM
join:2001-07-13
Lebanon, PA
| said by goldenspacek  :none here I have no packet loss, but I am getting some weird things with the lights on the back of the unit?, The signal strength meter only has one light lit, the one in the center, and that is it, regardless of the actual strength?????????????????????.
--
»www.wavecrazy.net Join WISPA today! »www.wispa.org/ |
|
goldenspacek
join:2005-04-22
Pinckney, MI | reply to moffl
Superdog, replace the power supply, use a 24v unit. Also, there may be a ton of interference from a local radio. |
|
superdog
I Need A Drink
Premium,MVM
join:2001-07-13
Lebanon, PA
| OK, I'll give that a shot. Is there any other quirks I should know about whith these things??
--
»www.wavecrazy.net Join WISPA today! »www.wispa.org/ |
|
goldenspacek
join:2005-04-22
Pinckney, MI | reply to moffl
The 5ghz and 6500 need a 24v power supply otherwise the power level is weak. Besides 1 locking up unit that i have (see other post) I have about 250 in service and don't deal with any problems on them for the most part (customer stupidity aside). |
|
