Yannou19
@65.94.x.x
| speedstream 5200 Bell Port Forwarding
Hi there,
I know that subject has been discussed often but i m stuck with this modem.
When i access to the port forwarding option of the speedstream 5200 the modem dont let me to enter my lan ip adress to redirect my ports. (i have a dlink di604 attached). It stays that it does not exist (ip: 192.168.0.141 ). (i put the firewall of the speedstream off too)
I was wondering if someone had this problem and if yes how to solve it. It was working a few days ago but Bell changed my IP and i cant remember how i did it i spent almost 3 nights.
Hope someone can help me 
thanks all: |
|
andyb
Premium
join:2003-05-29
SW Ontario | that ip you have is probably coming from the router not the modem.log into the router config and see what ip it has and use that. |
|
yannou19
@65.94.x.x
| Hi thanks for the help,
ya right my ip 192.168.0.141 is assigned by my dlink di604
but i cant find out how to see which Ip is attribued to this host by the speedstream.
I have checked all the interface of the speedstream and cant find. The problem is that you have to attach a single computer to the modem with ip 192.168.2.2 to have acces to interface of the speedstream. Really dont know how to find ip assigned by speedstream to my host with ip192.168.0.141.
mi di604 is well configured. For example when i plug the modem directly on the host and access from outside with public ip it works.
so dont know how to tell the speedstream to forward ports to 192.168.0.141 as far as i cant see which ip it assign to this computer. 
thanks |
|
