lutful
Premium
join:2005-06-16
Ottawa, ON
 ·TekSavvy Solutions..
| reply to VariableARK
Re: 900mhz setup
I chose Kenbotong for 900Mhz since they have a very broad selection.
»www.kbtusa.com/html/search.asp?CategoryID=7
Sectors upto 17.6 dBi dual-polarized with 23dB F/B.
Grids goes up to 21dBi with 30dB F/B.
Yagi goes up to 13dBi with 18dB F/B.
They also have a 17dBi backfire model with 25 degree beam width and 30dB F/B. However, no good CPE panel. |
|
VariableARK
join:2003-03-17
USA
| I finally got my 900mhz test setup going, I just started using an 11db yagi on each side. I want to get an actual production setup running, and am trying to figure out what antennas to get. I am thinking an 11db omni on the distribution end, and then use either 11db or 13db yagis for the clients.
I can't seem to find any decent sectors for 900mhz, and it seems that if my noise floor is -86 with a 30degree yagi that a 360degree sector is going to kill me.
What do you all think? |
|
