IZZY3
join:2004-08-31
North Richland Hills, TX
|  Spysweeper
The Latest Version: 5.0.5 (build 1286)
for me this build seem to slow down my pc.
Well my pc is not the newest.
amd 3200
2gb pc3200 ram
sata 160gb
ati 9600 128 vid card.
i wonder if anyone saw these issues with this build of spysweeper? i went back to Current Version: 4.5. (build 607) |
|
Don Pelotas
join:2004-12-10 | No, actually i usually only use Spy Sweeper as on-demand normally, but have used 5.0 with all shields for the last 2 days with no issue's/slowdowns unlike with previous builds. |
|
HA Nut
Premium
join:2004-05-13
USA
| reply to IZZY3
No, no slowdowns on any machines we have it on. My PC at home has an issue with SS 5.0 and changing users but I haven't had time to fully figure what's going wrong (I end up with 2 instances of SpySweeperUI running.) I have learned that SS 5.0 has a new "hidden" Self-Protect Shield and this may be my issue... |
|
snowj
@optonline.net
| reply to IZZY3
It didn't play well on my system either. Possibly a conflict with NIS 2006. What other real-time security do you have running?
Some behavior I observed after a clean install of Spy Sweeper 5.0.5.1286, all shields enabled:
- Memory usage values (for all processes) in task manager spontaneously shot up to ridiculous levels about ten minutes after boot, with nothing extra loaded. They didn't add up to memory use, but that too was significantly increased compared to last version.
- NAV scan time increased by about 12 minutes, very unusual.
- System freeze during ad-aware scan, task manager indicated Commit Charge around limit (never saw that before). Had to do a manual shut down.
- Lastly, general system functioning seemed off ... a bit choppy.
I filed a support ticket and reverted to the previous version. |
|
kikidoo
Premium
join:2001-07-09
Ventnor City, NJ
| It sounds like a problem I had and reported when I was testing the beta version of 5.0. Webroot fixed the problem (at least for me) very quickly.
But with the public release of 5.0.5.1286 I too have noticed my system is "a little off" but so far not enough for me to revert back to an older version. |
|
TeMerc
join:2004-01-22
Phoenix, AZ | reply to IZZY3
So far this morning I have read different threads concerning SS having conflicts with the following apps:
Mcafee av
SuperAntiSpyware
Norton av
Adaware
Looks to me as tho Webroot didn't do quite enough beta testing. |
|
IZZY3
join:2004-08-31
North Richland Hills, TX | reply to kikidoo
i run windows defender. symantec client security. |
|
BigPoppa44
join:2005-08-08
Washington, NC
 ·Embarq
| reply to IZZY3
I downloaded Spysweeper V5.0.5.1286 on Monday. I must say that I like it better than the previous V4.5. With all of the shields active in V4.5, My IE would sometimes hang when trying to open web pages. With V5.0 with all 13 shields active I don't seem to have the probem with IE freezing at certain points. I see that webroot got rid of the service called "WSSDK" and replaced it with something else. |
|
IZZY3
join:2004-08-31
North Richland Hills, TX
1 edit | yes wrssdk is gone. now to services running that are named similar. |
|
snowj
@optonline.net
| reply to BigPoppa44
I saw three processes connected to Spy Sweeper:
SpySweeper.exe
SpySweeperUI.exe
ssu.exe
It ended up being a pretty heavy load overall. At boot one of those (SpySweeper.exe or SpySweeperUI.exe) was the top memory hog on my system. |
|
HA Nut
Premium
join:2004-05-13
USA | reply to IZZY3
While I have not experienced any notable performance issues, SS 5.0 uses a great deal more memory than 4.5. Close to double the RAM... Averaging 45 to 50 MB much of the time. (And as noted, 3 processes now instead of 2.) |
|
Don Pelotas
join:2004-12-10 | Yes, i have had it as high as 70mb, but with no noticeable slowdown like with 4.5. |
|
DarkThrone
join:2000-12-14
Medina, ND | reply to IZZY3
Just updated.
Have the real time monitor off.
This has really slowed my system down. Only security app running full time is Nod32.
I may end up going back to an older image with the prev version of Spy Sweeper. |
|
HA Nut
Premium
join:2004-05-13
USA
| reply to IZZY3
I can confirm that my doubled up SpySweeperUI is caused by the SPS shield when I switch users (by logging off and then on.) I tested various settings several times and the only thing that triggered it was the Self-Protection Shield being switched on (which is the default setting.) So, I guess I'll be sending in a report of some kind to Webroot.
(FWIW, I kinda like the idea of the SPS so my workaround will be to right click the tray icon and "Shut Down" SS before logging off to go to the other account. Hopefully they can get this attended to soon...  ) |
|
hpguru
Curb Your Dogma
Premium
join:2002-04-12
| reply to IZZY3
I just finished working on a friend's laptop which was BSODing when he attempted to shut it down. Turned out to be the latest build of Spysweeper and WinDefender that was causing the problem (both running resident). Removing Spysweeper stopped the BSODs but there was still a system error being logged at shutdown in the System log which always coincided with a log entry for WinDefender detecting spyware. To make a long story short he had no infections of any kind so I removed WinDefender and that eliminated the system error as well. He said he would reinstall Spysweeper again later and see if the problem arises again.
--
Get hpHOSTS!
What is Security?
Paranoia is no substitute for understanding. |
|
pc319
Premium
join:2002-04-24
The Q
| reply to IZZY3
I had 100% CPU usage most of the time and had to reboot just to get my system back to normal (Could not terminate the spysweeper process because of some new hidden self-protect setting.) It always eventually happened again within a short period after rebooting. I read on the Castlecops spysweeper forum that some users ended up disabling the Keylogger Shield for some BSOD errors, so I decided to give it a try even though I did not have that problem. Once I disabled that shield the slowdown problems went away. Some users there stated that it was a known problem during the beta testing that supposedly got fixed. |
|
crh721
Confused Ole Guy
Premium
join:2003-01-17
Lees Summit, MO
| reply to IZZY3
It kept my Power management in XP from working. Monitor would not turn off after the time specified. Also AdWatch ( in AdAware Plus was trying to re register programs that had been installed for a long time. Went back to V. 4.45 and it all works OK again.
--
Bob H |
|
IZZY3
join:2004-08-31
North Richland Hills, TX | seems to me like more beta testing is needed. 4.5.607 works good. so i am sticking with it.lets keep this thread going to see what others find out. hopefully webroot gets a new build out soon. till then i am very happy with 4.5. |
|
redsand
join:2006-07-13
Silver Spring, MD
| reply to IZZY3
Hey guys longtime lurker first time caller. Anyhoo, I too had upgrade problems and called tech support. The problems my machine exhibited were slow browser, no web page loading after viewing 5 pages,shut downs and reboots, no shutdowns at all/ just a stuck page, lastly sounds in the background as if someone else is in control.
The support person had me uninstall using the start button/programs/webroot/uninstall spysweeper/ she then e-mailed the file and had me install. I FIRST had to close macafee and zone alarm (key point). If you upgrade with them still on then houston we WILL have problems! Lastly reboot your machine.
So far so good and the speed seems back to normal but I do still hear noise occasionally in the background. |
|
the truth is
@rr.com
| reply to IZZY3
I started using Spy Sweeper about 4 years ago, it was a great program back when, so far this year I've installed the program numerous times, I even got new links from Webroot to install the program. For the last year and a half or so, it takes to long to start up, shutdown, many sites hang, not all. More times than not I have to turn of my IE shields to update spywareblaster. I never had spyware when using the program, I never had spyware not using it. I don't have to worry anymore, it's off my machine and life on the net is great. I would rather have spyware than ever use this product again.
A happy Ewido user. |
|
