inova
join:2006-05-03
Macnutt, SK | Re: Subnets Hmmm, netbios garbage... I have thought about that but don't have the first clue how to deal with it. How would I filter it at the CPE? Given the Delib 23xx radios I have been using. | |
|
 
gmcintire
Graham
Premium
join:2005-08-09
Blue Ridge, TX
| Re: Subnets said by inova  :Hmmm, netbios garbage... I have thought about that but don't have the first clue how to deal with it. How would I filter it at the CPE? Given the Delib 23xx radios I have been using. The DLB-23xx support Layer 2 client isolation, just enable "Block WLAN Relay."
Directly from the manual:
The device supports isolation function. If you are building a public Wireless Network, enable this function can provide better security. The device will block packets between wireless clients (relay). All the wireless clients connected to the device can’t see each other.
| |
|
 | inova
join:2006-05-03
Macnutt, SK | Re: Subnets Ok, so that's what that means. Would using this feature be problematic if both sides of the radio were on public or 192.168.xxx.xxx schemes? | |
|
| |
gmcintire
Graham
Premium
join:2005-08-09
Blue Ridge, TX
| Re: Subnets said by inova :Ok, so that's what that means. Would using this feature be problematic if both sides of the radio were on public or 192.168.xxx.xxx schemes? It shouldn't matter what IP space each interface your AP has because the isolation is done at layer 2, while routing is layer 3. | |
|
| | | inova
join:2006-05-03
Macnutt, SK | Re: Subnets Thanks, I'll give it a go... | |
|
|
|
|
