kiokyau
join:2002-08-28
Malaysia | reply to computerguy
Re: [Streamyx] How to set Riger DB102 modem back to modem?
No, the password will remain the same even after rebooting to default configuration. |
|
computerguy
join:2006-08-03
Singapore | reply to computerguy
By the way, if I select reboot to default configuration. Will the admin password also reset to default.
If yes, what is the default username and password for this modem? |
|
computerguy
join:2006-08-03
Singapore | reply to computerguy
Thanks for your reply. I will try that later. |
|
kiokyau
join:2002-08-28
Malaysia
| reply to computerguy
You just have to reset the modem back to default configuration.
One way is to take a pin and press the reset button at the back of the modem for at least 5 seconds.
Another way is to login into the modem's page at 192.168.1.1 and go under ADMIN. Click on the Commit & Reboot link at the left side. Under the Reboot Mode dropdown bar, choose Reboot to default configuration and then press the Reboot button at the bottom.
That's all. The modem will go back to bridge mode and you can connect it to a broadband router. Remember to set your Streamyx username and password in the broadband router so that the router can login for you.  |
|
computerguy
join:2006-08-03
Singapore
| Previously, Riger DB102 is set to router mode. I would like to set it back to normal modem so that I can connect it to a broadband router [ Dlink DI-704P].
Can anyone here can show me how to do the setting? Thanks for reading and replying my post. |
|
