SipSizzurp
Fo' Shizzle
Premium
join:2005-12-28
Hilo, HI
 ·RoadRunner Cable
| reply to Rahail
Re: How to Build a low cost cpe with build in amp
I just got them today and I will test them some more and let you know. The problem that you have with 3000 feet of trees and houses will not get much better, even if you put a big amplifier on each end. 2.4 GHZ will be blocked easily by the obstructions and I do not think you will have much luck with more power or better antennas. They will help a little, but still will not be reliable in the end. Think of the wi-fi signal like a flashlight. If the light from a little flashlight cannot go through the side of a house, a great big spotlight will not get through either. The wall will stop all of the light. Your obstructions are going to stop almost all of your signal, even if it is very strong to start with. You need to find a place in the middle for a relay that can get service to each end. By the way, light and 2.4 GHZ radio waves are the same stuff, just a big difference in frequency.
--
Mi ultima pinche Carta Blanca. Que triste ! |
