rmanaka
Premium
join:2006-08-07
Jenkintown, PA
2 edits |  reply to rcilink
Re: Getting a WRTp54G to take 3.1.17-NA...
This is really, really great. Thank you rcilink!!! Version 3.1.17 is indeed running like a SPA-2002/PAP2 as I just reinitialized the router and then added a "Voicepulse" recommended dial plan for the SPA-2002:
(x#|xx#|*821[2-9]xx[2-9]xxxxxx|*82011x.|*xx|*1xx|[3469]11|0|00|1[2-9]xx[2-9]xxxxxx|011x.|[2-9]xx[2-9]xxxxxx)
I think the Vonage WRTP54G is really open now! :D |
|
netmitra
join:2006-09-28
Sunnyvale, CA | Re: Getting a WRTp54G to take 3.1.17-NA... [ Still locked }
Rmaneka;
Unfortunately my WRTP54G is still locked by Vonage and running 1.00.20. I can't unlock it so no access to update.html
Please help |
|
netmitra
join:2006-09-28
Sunnyvale, CA
| WRTP54G Unlocked ---- Thank you guys !!
After 1 week of attempts - Success now.
I was successfully able to unlock my Vonage WRTP54G using the firmware upgrade procedure. The cyt software failed to do so. I used the following link and it worked like charm !
I was getting "Invalid Code Pattern" error with 3.1.17-NA firmware from Linksys support. Then I used celiom.googlepages.com/linksys code which got me onto 3.1.17, but No NA.
My router wasn't accepting any user:tivonpw password and I was stuck. Then I did a factory reset using the poke-in button at the back. After that I was able to access update.html and then upgraded the firmware. Now I am on 3.1.17 and life feels good. Configuring VIatalk was a cakewalk.
Next Project is to install astersik on this. ANy easy-2-go guide will be appreciated. |
|
